|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

09-10-2010, 05:28 PM
|
|
|
|
Join Date: Aug 2009
Location: Gilbert, AZ
Posts: 118
|
|
Build table size
For those building already, what size tables are you using, I am considering building the EAA tables but they seem a little narrow to me when working with wings etc.
__________________
Chris Lucier
http://RV12SP.Blogspot.com
RV12 Empennage Arrived (Early) 
N712EC Serial number 120424
President EAA Chapter 228
|

09-10-2010, 05:32 PM
|
 |
|
|
Join Date: Jun 2007
Location: Fairbanks AK
Posts: 758
|
|
Use the EAA design and build them to suite your needs, I built one that was 4x5 with a 2 inch overhang all around, if you put it on casters it makes it much more versatile.
-david
__________________
RV-7 N87DX Built, Flown, and Sold!
|

09-10-2010, 06:44 PM
|
|
|
|
Join Date: Feb 2010
Location: Perth, Western Australia
Posts: 1,647
|
|
Different idea
I used a hollow core door (33" x 80") as a table top on a steel frame that I welded up from from some leftover 40mm square tubing. It's on castors, and I also added a couple of full length chipboard shelves. It was a cheap solution, and the size works fine for me, but there are endless variations that you can use, and the EAA design is a popular choice.
As an aside, I ordered my kit in early Feb, so based on the time interval beteen our respective kit numbers, I figure that VAN's must be selling an average of about 10 RV12's per month. Not bad.
__________________
rgmwa
RV-12LR 912ULS
120346
|

09-10-2010, 06:51 PM
|
|
|
|
Join Date: Nov 2008
Location: Gloversville, NY
Posts: 1,587
|
|
Check here for a picture of my benches: http://www.mykitlog.com/users/displa...=73553&row=303
I sized mine for a 4X8 sheet of plywood cut into three equal sized pieces. They have worked out very well. I put them together in various configurations depending on the task at hand.
__________________
John Peck, CFII, A&P, EAA Tech Counselor, Flight Advisor.
?Master Pilot? Award, UFO Member.
RV-12 N37JP 120176 Flying since 2012.
One Week Wonder Build Team, OSH 2018.
VAF paid through 10/2019.
|

09-10-2010, 07:08 PM
|
 |
|
|
Join Date: Oct 2007
Location: In New Braunfels, ist das Leben schön!
Posts: 871
|
|
I built two just like the EAA 1000 plans. Then I modified them with castors, an inset back rivet plate and T-nuts with long bolts so I can bolt them together as a single 4x5 or 2x10 table. So far, I wouldn't change a thing through the wings.

__________________
Larry New
RV-7A - Built, flying 900+ hrs
RV-10 - Built, flying 2.9 hrs
??? - RV-12, Subsonex
48 States in 7 Days!
VAF Paid - Annual Autodraft
|

09-10-2010, 11:16 PM
|
|
|
|
Join Date: Dec 2005
Location: San Pedro
Posts: 1,013
|
|
I copied
Big John's tables and am happy with the result. You get three tables from one sheet of plywood. Each of the tables is 48" by 32" and I can bolt them together either as 144" by 32" for the 'long' item construction or 96" by 48" for the fuselage, etc. Works great.
After seeing some 12 builders say that they wished that they had the ability to raise or lower their work benches, I incorporated an adjustable height feature. That was a lot of extra work and probably not worth it.
Good luck with your choice. 
|

09-11-2010, 05:09 AM
|
|
|
|
Join Date: May 2008
Location: Marietta, Ga.
Posts: 220
|
|
Build Tables
Our first kit was the wing kit and we took out the parts from the shipping crate, flipped the crate upside down, and put them on two saw horses...and no complaints through the build process. We built the wings on another set of saw horses; it was't rocket science. 
Meade and George
N612RV (with NEW paint job...pics to follow)
|

09-11-2010, 01:08 PM
|
 |
|
|
Join Date: Feb 2005
Location: LSGY
Posts: 3,199
|
|
no wheels
I thought about wheels as well, but decided to try these plastic things first, to see if I can just slide the workbench - works great!

|

09-12-2010, 10:08 PM
|
|
|
|
Join Date: Apr 2010
Location: Fond du Lac, Wisconsin
Posts: 20
|
|
Table advice for Plans and Building
I layered 2 old doors together on top of 2 saw horses for my plans and parts and a few hand tools. I also used the shipping crate the first kit came in(tailcone/empenage). I bought 2 movers dollies from Menards, one for each end, bought a few 2x4's and built up the top from the shipping crate top. I then put a piece of inexpensive carpet on it to help prevent scratches. I must say this works super. Easily movable so I can reposition and work from all sides. I keep spare parts underneath in the crate part. This has been great. Also, I will either keep this for other projects or use the pieces such as the movers dollies and saw horses at a later date. I will try to attach my web page for review.
WorkBench:
http://www.mykitlog.com/users/displa...g=102426&row=3
Plans Table from Doors:
http://www.mykitlog.com/users/displa...g=106066&row=1
Small Parts Organization:
http://www.mykitlog.com/users/displa...g=106065&row=2
|

09-13-2010, 07:07 PM
|
|
|
|
Join Date: Sep 2009
Location: Rochester, MN
Posts: 710
|
|
Quote:
Originally Posted by E. D. Eliot
After seeing some 12 builders say that they wished that they had the ability to raise or lower their work benches, I incorporated an adjustable height feature. That was a lot of extra work and probably not worth it.
|
I'm curious how you did the adjustable height modification. Any photos? Also, is most of the bench work on a RV-12 done in a sitting or standing position? Maybe it depends on the builder, but my feet don't do well standing for hours on end. I'm really trying to decide what table height is best for me.
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 05:34 AM.
|