VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 08-23-2010, 09:30 PM
Moura Moura is offline
 
Join Date: Oct 2009
Location: Uberaba, MG, Brazil
Posts: 122
Default SkyView EMS Interface

Hi, I have the Dynon skyview EMS installed and the EGT bars show besides the colored bars, a small white stripe. What is that?

Thank you
Reply With Quote
  #2  
Old 08-24-2010, 12:36 AM
schristo@mac.com's Avatar
schristo@mac.com schristo@mac.com is offline
 
Join Date: Sep 2007
Location: WA
Posts: 988
Default white bars are the CHT temps...

white bars are the CHT temps...
__________________
Stephen

RV7 powered by a lycoming thunderbolt IO-390
turning a whirlwind HRT prop

with more hours flying than building... 2,430 on the hobbs!
ORCA Flight
Race 771
margarita!
Reply With Quote
  #3  
Old 08-24-2010, 05:27 AM
apkp777's Avatar
apkp777 apkp777 is offline
 
Join Date: Oct 2008
Location: Schaumburg, IL
Posts: 2,053
Default

I believe they only show up in the combined EGT/CHT view as in the 80/20 or 40/40/20 view.
__________________
Tony Phillips
N524AP, RV 9 (tail wheel)
Reply With Quote
  #4  
Old 08-24-2010, 08:40 AM
Moura Moura is offline
 
Join Date: Oct 2009
Location: Uberaba, MG, Brazil
Posts: 122
Default

I believe that is incorrect. The white bars only show when in lean mode. They can be seen on figures 25, 26 and 27 of page 42 of the following manual. http://www.dynonavionics.com/downloa...er%20Guide.pdf
Reply With Quote
  #5  
Old 08-24-2010, 08:43 AM
apkp777's Avatar
apkp777 apkp777 is offline
 
Join Date: Oct 2008
Location: Schaumburg, IL
Posts: 2,053
Default

Quote:
Originally Posted by Moura View Post
I believe that is incorrect. The white bars only show when in lean mode. They can be seen on figures 25, 26 and 27 of page 42 of the following manual. http://www.dynonavionics.com/downloa...er%20Guide.pdf
Darn it, now you've given me a good reason to go fly and check it out. I will report later today.
__________________
Tony Phillips
N524AP, RV 9 (tail wheel)
Reply With Quote
  #6  
Old 08-25-2010, 08:44 AM
Moura Moura is offline
 
Join Date: Oct 2009
Location: Uberaba, MG, Brazil
Posts: 122
Default

Hi Tony, did you figured out?
Reply With Quote
  #7  
Old 08-25-2010, 09:27 AM
schristo@mac.com's Avatar
schristo@mac.com schristo@mac.com is offline
 
Join Date: Sep 2007
Location: WA
Posts: 988
Default CHTs in combined CHT/EGT view

the white bars are the CHT temps... they turn yellow and red toward the right according to the temps set up for the sensor... as tony pointed out they are only shown in the combined compressed CHT/EGT view... they are shown in both lean and normal mode for this view.

here is a shot after engine shut down in normal display mode for reference.
__________________
Stephen

RV7 powered by a lycoming thunderbolt IO-390
turning a whirlwind HRT prop

with more hours flying than building... 2,430 on the hobbs!
ORCA Flight
Race 771
margarita!

Last edited by schristo@mac.com : 08-26-2010 at 04:40 AM.
Reply With Quote
  #8  
Old 08-29-2010, 12:41 AM
Moura Moura is offline
 
Join Date: Oct 2009
Location: Uberaba, MG, Brazil
Posts: 122
Default

Stephen, you right all the way. Took my 10 for a spin and messed with all the possible layout to realize that the bars reflected what you mentioned.
Thank you

Moura
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:52 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.