VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 08-14-2010, 06:01 PM
RetiredRacer RetiredRacer is offline
 
Join Date: Apr 2009
Location: Ipswich QLD Australia
Posts: 245
Default Ray Alen trim servo wire problem???

How do people get the wire for the servo through the elevator spare? The problem is the servo's threaded rod and the wire are having a dispute as to who has the right of way in the hole provided, and I know who's going to win this dispute, and it is not going to be the wire.

Bob (down under)
Reply With Quote
  #2  
Old 08-15-2010, 11:50 AM
Paul B Paul B is offline
 
Join Date: Jan 2009
Location: Beautiful downtown Winnemucca
Posts: 87
Default Make another hole

Drill a hole above the existing hole in the spar, halfway between the existing hole edge and the spar flange. The hole should be as small as possible, but still able to accept wire and the appropriate bushing. PLEASE NOTE: I haven't flown my plane yet so I don't know if this modification will cause it to fall out of the sky.
Reply With Quote
  #3  
Old 08-15-2010, 04:12 PM
RetiredRacer RetiredRacer is offline
 
Join Date: Apr 2009
Location: Ipswich QLD Australia
Posts: 245
Smile

Thanks Paul, I finished up finding another thread with the same suggestion. Already done.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:52 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.