Joe et al,
I am still spooling up in production of these units. Like every product, demand sets the production batch size, whether some parts get farmed out, etc. I have b/t 10 and 50 of many parts, for the assemblies. These are all cnc machined, and many parts require fixtures for the cnc lathe and mill work. I was trying to have 10 beta units ready for sale at OSH but fell short of this goal, due to other prototyping work (DRDT-2 powered head on display).
Here are the
PRICES:
C-Squeezer System $875, includes the following:
Model 3300-1 Intensifier w/foot valve
Model 3000-1 Squeezer Head w/ variable compression pin
6' Hydraulic line
3" Standard yoke and shear pins
Removable handle
Bleeding syringe
Operation Manual
Options:
Model 3100-1 Blind Rivet Puller $280
Model 3020-1 Swivel Fitting $95
Fluid Tight QD (Quick Disconnect) $85
Please contact Cleaveland Aircraft Tool if you want to order one. Cleaveland and MDS will stand behind this product 100%, and if you are not fully happy, will refund you money or make it right.
If you have additional questions, you might want to review the MDS website:
http://www.mds-tool.com/
or contact me at:
mdsinc@ameritech.net
Thanks for your interest.