VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 04-17-2006, 07:06 PM
jany77 jany77 is offline
 
Join Date: Sep 2005
Location: monterey ,ca
Posts: 105
Default main squeeze form cleveland

hi guys i have guestion about setting rivets with main squeeze ,when im trying set rivet the opening between rivet sets seems to be little bit less then real rivet lenght after setiing ,what it does when im setting rivet ,basicly the handles trying open them self any idea what im doing wrong thanks
Reply With Quote
  #2  
Old 04-17-2006, 07:47 PM
scard's Avatar
scard scard is offline
 
Join Date: Jun 2005
Location: Cedar Park, TX
Posts: 3,156
Default

No problem. Same thing with any other (normal) squeezer, including a pneumatic setup. The yoke flexes a bit when force is applied.
__________________
Scott Card
CQ Headset by Card Machine Works
CMW E-Lift
RV-9A N4822C flying 2200+hrs. / Cedar Park, TX
RV8 Building - fuselage / showplanes canopy (Done!)
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 07:27 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.