Section 9 page 8

[mnmisage]

Hi all,

Can someone please take a look at Section 9 page 8 and tell me what it says in Figure 1 in the lower right hand corner. There are two arrows pointing at the drawing in the lower right hand corner, one to a zoom view and the other to the stabilator skin.
Last night, while wrestling with the blue plastic on the inside of the skin, I accidentally placed some of that wonderful gaffer/duct tape used in shipping on my plans. When I removed the tape, it took that text with it!

Thanks!

Mark Misage

www.n624rv.blogspot.com

[Mark Henderson]

it says match drill 2 places.

[mnmisage]

Thanks Mark!

Mark Misage
www.n624rv.blogspot.com

[mnmisage]

Mark,

I just looked at the drawing again and it says match-drill 2 places above the drawing.What I am missing is the text in the lower right of the drawing pointing to the zoom view of the inboard edge of the HS skin.

Mark Misage
www.n624rv.blogspot.com

[JoeBlank]

http://picasaweb.google.com/jblank6/...54636195029234

[mnmisage]

Thanks for the copy Joe! And thanks again for the help Mark. I will be more careful with the tape in the future as I do battle with the blue plastic!

[Topturn]

Mark we're pretty much at the same stage in the build as I'll probably be working on half rivetting the skins tomorrow ready for inspection and I can't decide should I leave the blue stuff on the external surfaces until a lot later in the build or remove it all now?

I used the correct tool in the squeezer for the 470 rivets this time and only drilled 6 out as I wasn't happy with them!!

As for the plans I 'borrowed' works photocopier and have a set for the work shop that I put in clear plastic wallets and the originals are in the house that seems to work pretty well for me. Also paid for my wings and fuselage yesterday (pound/dollar exchange rate could have been better) and they should ship in the next few days although I guess the lead time via the sea will be around a month so plenty of time to finish the empennage kit....... Or at least that's the plan.

[Geico266]

Originally Posted by mnmisage

Hi all,

Last night, while wrestling with the blue plastic on the inside of the skin, I accidentally placed some of that wonderful gaffer/duct tape used in shipping on my plans. When I removed the tape, it took that text with it!

Thanks!

Mark Misage

Sorry Mark, but that is a first, and it's funny!

[mnmisage]

Larry,

No blood, no foul but it was no doubt a sticky situation!

[mnmisage]

Jason,

I will drill the hinges tomorrow and perhaps even skin the HS. I did the soldering iron on the outside along the rivet lines and will keep the blue stuff on until the riveting is done. I will then take all of it off and store it inside the house because the shiny aluminum just looks so cool! I took all of the blue off the finished pieces and they look like art. Maybe I am just rationonlizing because I am considering storing the tail cone (when finished) in the family room as a bit of modern industrial art!

I ordered the wing kit a couple of weeks ago in the hope that it will be here by summer vacation since I am a teacher and will have some time available to work on the plane.

Thanks for the update and I will keep track of your build on your blog.

Mark