|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

02-04-2006, 09:57 PM
|
|
|
|
Join Date: Jul 2005
Location: sugar land, texas
Posts: 43
|
|
to torque or not to torque?
while working on my rudder i noticed that there is no mention of torquing the screws that hold the counterweight. Does one torque all bolts and screws on the plane? I tried to torque the screws to 100 inch pounds and couldn't stop the screwdriver fron slipping on the screw.!! I decided to stop and ask before proceeding further!!!!
btw, rv7
dennis
|

02-04-2006, 10:27 PM
|
|
|
|
Join Date: Oct 2005
Posts: 194
|
|
Torque
Refer to AC43.13.1b Chapter 7. It contains all the torque values for AC fasteners. The publication is Acceptable Methods, Techniques, and Practices should be very helpful.
T88
RV10
|

02-04-2006, 10:56 PM
|
|
|
|
Join Date: Sep 2005
Posts: 1,110
|
|
Quote:
|
Originally Posted by dennis
while working on my rudder i noticed that there is no mention of torquing the screws that hold the counterweight. Does one torque all bolts and screws on the plane? I tried to torque the screws to 100 inch pounds and couldn't stop the screwdriver fron slipping on the screw.!! I decided to stop and ask before proceeding further!!!!
btw, rv7
dennis
|
I think you're confusing a AN509 with an AN5-sumthin. AN509 just refers to the style (100 degree head). So I think it's an AN509 10R24 bolt if I remember right. 10Rwhatever is a 10-32 screw, and the proper torque is 25in/lbs (same as an AN3-something). I can't ever remember how to decode the R24 part....has to do with the grip length, so I always have to look that up if I'm interested.
edit: I'll also mention that I'm a fraidy cat, so when I put mine in, I globbed a little epoxy w/microballoons on the bolts before I closed up the rudder. My thought is that those suckers are in there forever. YMMV...just how I did it 
__________________
John Coloccia
www.ballofshame.com
Former builder, but still lurking 'cause you're a pretty cool bunch...
Last edited by jcoloccia : 02-04-2006 at 10:59 PM.
|

02-05-2006, 03:36 AM
|
|
|
|
Join Date: Jun 2005
Location: UK and nr. Hannover, N Germany
Posts: 11
|
|
Torque Q
Hi,
I had the same Q previously that I asked Vans and their response was :-
" You don't Torque bolts unless they are going into something fixed like a nutplate - You torque the NUT and for those the correct setting is 20/25 inch pounds "
Happy building
|

02-05-2006, 10:03 AM
|
 |
|
|
Join Date: Aug 2005
Location: Pasadena CA
Posts: 2,484
|
|
Armstrong torque works well on anything AN4 and smaller.
__________________
Stephen Samuelian, CFII, A&P IA, CTO
RV4 wing in Jig @ KPOC
RV7 emp built
|

02-05-2006, 10:35 AM
|
|
|
|
Join Date: Jul 2005
Location: sugar land, texas
Posts: 43
|
|
Thanks for replys
thanks to all for the helpful information.
I looked up the section on fasteners and bolts, and now feel much better: torqued the nuts correctly this a.m. I appreciate this forum of builders where a non mechanical type can ask for help and stay out of trouble!
dennis, rv7 empennage: getting ready to order wings.
|

02-05-2006, 11:51 AM
|
|
|
|
Join Date: Jan 2005
Location: SoCal
Posts: 2,061
|
|
Just a quick comment on the "armstrong" method. Most folks will tighten stuff way too tight when using this method. 22 inch-pounds is only about a 3-4 pound pull on a typical wrench. If a guy's gonna torque things by feel, it might be a good idea to do a couple with a torque wrench first so as to gauge what "tight" feels like.
__________________
Steve Zicree
Fullerton, Ca. w/beautiful 2.5 year old son 
RV-4 99% built  and sold 
Rag and tube project well under way
paid =VAF= dues through June 2013
|

02-05-2006, 06:32 PM
|
|
|
|
Join Date: Jan 2005
Location: Fairbanks, AK
Posts: 82
|
|
I torqued some AN-3's with my brand new, calibrated Mac torque wrench. I too was amazed at how the "correct" torque value seemed awfully loose. Couldn't stand it, so tightened em a fair amount more. The danger is if you go too far you can pretty easily pull the smaller bolts in half.
Another problem: you'll find there will be a lot of the smaller bolts in places where there's no way you're ever going to get a torque wrench on them. That's why it's important to develop a "feel".
I think (I hope) there's a fair bit of room between too loose and too tight torque on the small bolts. On the bigger ones, say the wing attach bolts, it's much more important to get close to the correct torque.
John Miller
|

02-05-2006, 10:34 PM
|
|
|
|
Join Date: Jan 2006
Location: PA
Posts: 264
|
|
Quote:
|
Originally Posted by osxuser
Armstrong torque works well on anything AN4 and smaller.
|
Change that to "fingerstrong" and you're a bit closer to reality...
Look closely at just how small the threads are on an AN3-series bolt; it doesn't take a whole lot of over-torque to permanently deform those threads. As was said earlier, if you're not going to use a TQ wrench consistently on smaller hardware, it'd be a good idea to torque a couple same-size fasteners a couple times with the TQ wrench to get a feel for the correct torque.
__________________
Ken
Helicopter mechanic (A&P)
USAFR KC-10 Boom Operator, on final approach to retirement
My RV-9/8/7 dream may be on life support, but it ain't dead yet!
|

02-06-2006, 09:54 AM
|
|
|
|
Join Date: Jan 2005
Location: Victoria B.C. Can.
Posts: 368
|
|
When appling a specified torque to a nut/bolt combination always apply torque to the nut while holding the bolt stationary. Tightening or torqueing the bolt applies a twisting force to the bolt shank which would give a false torque reading. This method would apply to screws as well if they are installed in combination with a nut. Hold the screw/bolt, and tighten the nut. In actuality you are really s t r e t c h i n g the shank of the bolt or screw and if the shank has a twisting load and a tension load at the same time,.............well thats not good. False torque readings will also be indicated if using a socket extension, longer extension=larger error, due to the extension twisting when applying torque to the nut. Also, never apply thread lub as this will give a false or inaccurate torque reading.
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 07:19 AM.
|