VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 08-15-2008, 03:16 PM
Jim P's Avatar
Jim P Jim P is offline
 
Join Date: Jan 2006
Posts: 934
Default Silver Exterior Paint

For those who have painted their RV's in a military scheme using a base coat of silver, with markings applied over, I have a couple questions:

1) What type/ color did you use for the Silver (do you have a link to a photo)?
2) For national insignia markings, did you go with appliques or mask/paint? Are you happy you went what-ever way you went?

Thanks,

Jim
__________________
Jim Piavis
RV-7 (Flying!)
http://adap.com/rv7
Redmond, WA
Reply With Quote
  #2  
Old 08-15-2008, 04:10 PM
gmcjetpilot's Avatar
gmcjetpilot gmcjetpilot is offline
 
Join Date: Jan 2005
Posts: 4,285
Default Lots of shades of silver to pick from

There are a lot of silvers. I would pick a paint system for your plane first, Jetglo (Sherwin Williams), PPG and so on. Than you can use their standard color pallet catalog from their line of colors to choose from.

A real custom color line paint line is House of Kolor. They have all kinds of types of paints and the most custom colors to pick from. The big factor is a light sliver (towards white) and darker silver (towards gray). I doubt there is an official military silver and if there is, I doubt it would look good on an RV, at least to me (ie drab).

My guess is if you want a real authentic look it will be drab, a flat silver. Do you want a dull military flat silver or do you want a metallic, candy or pearl for more flash or pop? I was going silver but decided on RED.

A good source to pick a color from is automotive. Silver has been the hands down winner of the most popular color for cars for many years now. You can just go to a parking lot; you will see some nice and not so nice slivers. White I guess is taking over from silvers long run as most popular car color, no doubt followed by another popular color next year. There are so many silvers to choose from. Check the luxury car brands for silvers to pick from.

I think you really want at least metalic not flat, but that is my opinion.
__________________
George
Raleigh, NC Area
RV-4, RV-7, ATP, CFII, MEI, 737/757/767

2020 Dues Paid

Last edited by gmcjetpilot : 08-15-2008 at 04:24 PM.
Reply With Quote
  #3  
Old 08-15-2008, 04:20 PM
Jim P's Avatar
Jim P Jim P is offline
 
Join Date: Jan 2006
Posts: 934
Default

I was thinking about polishing but decided against that. I'm somewhere in the middle of the silver shades, not too dark, not too light, and I don't want it to look grey. My anticipated shop is using Imron for the metalics right now but use PPG for solids.
__________________
Jim Piavis
RV-7 (Flying!)
http://adap.com/rv7
Redmond, WA
Reply With Quote
  #4  
Old 08-15-2008, 06:56 PM
mannanj's Avatar
mannanj mannanj is offline
 
Join Date: Jan 2005
Location: Mtns of N.E. Georgia
Posts: 1,322
Default Silver

jim:

Go to your local auto paint store or collision repair center and check out their paint chips. The one that I chose was the Mercedes Benz color "Brilliant Silver". You might like that one.
__________________
LAUS DEO
Mannan J.Thomason, MSGT. USAF (RET)
VAF788
"Bucket List" checkoff in progress!
Reply With Quote
  #5  
Old 08-18-2008, 06:42 AM
DaX's Avatar
DaX DaX is offline
 
Join Date: May 2007
Location: newnan.ga
Posts: 426
Default

Jim, I was able to see Scott Chastain's "Descending Dove" first hand at Oshkosh this year, and it looks amazing. For now, I think I'm going to plan on using the same paint system and silver color as his. Here's a quote from the PM he sent me:

Quote:
Originally Posted by Scott Chastain
I used PPG Deltron two-stage acrylic urethane for the entire exterior...the colors are Chryser colors: Viper Red, Prowler Silver."
__________________
http://flyingtodhunter.livejournal.com
RV-7 Wings, Tail, & Tools FOR SALE
Reply With Quote
  #6  
Old 08-18-2008, 08:57 AM
CNEJR CNEJR is offline
 
Join Date: Jan 2007
Location: Conroe, Texas
Posts: 517
Default

I have polished my 6, I am looking at a product by ALSA called mirrachrome. Looking at it on their website, it looks like polished aluminum. It is pricey, but I don't think I would need that much, just fiberglass parts. Might check it out.
__________________
Chuck Elsey
RV6 Start 7/06- Flying!
N349CE
Reply With Quote
  #7  
Old 08-19-2008, 07:54 AM
F1Boss's Avatar
F1Boss F1Boss is offline
 
Join Date: Aug 2006
Location: Taylor Texas
Posts: 811
Default Oh, which silver to use?

Hey Fellas:

Good thread -- I'm looking to spray a C45 (to protect the aluminum, more than anything else), and getting that much silver wrong would not make me happy.

My plan:
Check out some paint chips, and pick the silver with the least amount of black in it (to get the lightest/brightest color). I used 1994 GM fleet silver on my 1st Rocket -- the one with silver and black on it, and it turned out pretty well indeed. I'm gonna look at that one 1st, and go from there. My preference is single stage (weight on that much surface area is considerable -- probably 300 lbs or so?), tho base/clear is striking, and easy enough on a smaller subject.

Remember,if you goof up (runs, sags, etc), you cannot sand out any metallics. Hire a good gun man before mixing up any final color coats.

Nuvite makes a good polishing system, and a std buffer can be used to polish the ship. I did a couple pieces of the Beech, and even tho the starting point included quite a bit of sfc corrsion, it went OK and the final product was actually acceptable. Starting with a newer RV would not take any more time than a paint job would, and would allow for a lighter ship...I just don't have the energy to polish an acre of 65 year old aluminum... especially when about 40% would be on the bottom.

Carry on!
Mark
Reply With Quote
  #8  
Old 08-19-2008, 01:13 PM
AntiGravity's Avatar
AntiGravity AntiGravity is offline
 
Join Date: Dec 2005
Location: Hamilton, New Zealand
Posts: 632
Default

Quote:
Originally Posted by F1Boss View Post
Remember,if you goof up (runs, sags, etc), you cannot sand out any metallics. Hire a good gun man before mixing up any final color coats.
Why not Mark? Do you mean you can't sand at all, or just that you have to sand the whole panel because it would be impossible to match/touch up an small area?
__________________
Jeff Preou
Hamilton, New Zealand
STATUS: not building anything at all... yet ...
http://www.preou.com
http://www.kitlog.com/users/index.php?user=jpreou
Reply With Quote
  #9  
Old 08-19-2008, 02:19 PM
F1Boss's Avatar
F1Boss F1Boss is offline
 
Join Date: Aug 2006
Location: Taylor Texas
Posts: 811
Default

Quote:
Originally Posted by AntiGravity View Post
Why not Mark? Do you mean you can't sand at all, or just that you have to sand the whole panel because it would be impossible to match/touch up an small area?
I tried to sand out a run in a silver panel -- the sanded area turned grey. I asked about this, and the 'no sanding on metallics' response came out. So, that's how I learned that lesson.

If you look at the ships that are painted here, you will see a succession of primer/camo jobs. That sort of easy application displays my (lack of) gun talent. Just about anyone can shoot primer, and I'm living proof!

So, just about ANY amount of touch-up is impossible, with me as the gunner. I know a few I could call to handle the gun for me, and I will, if I decide to go with the silver, that's for sure!

Does this help?

Carry on!
Mark
Reply With Quote
  #10  
Old 08-19-2008, 04:57 PM
AntiGravity's Avatar
AntiGravity AntiGravity is offline
 
Join Date: Dec 2005
Location: Hamilton, New Zealand
Posts: 632
Default Alsa Corp

Ahhhh. Right.
I was going to see about using Alsa Corp Mirrachrome or Killachrome on my Grove gear legs, but my change in plans for the overall scheme may mean they just get painted in metallic gray like the lower fuselage.
__________________
Jeff Preou
Hamilton, New Zealand
STATUS: not building anything at all... yet ...
http://www.preou.com
http://www.kitlog.com/users/index.php?user=jpreou
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:25 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.