VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Regional Forums > Texas (North) > Shared Tools/Gear
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-09-2007, 12:39 PM
jferraro17's Avatar
jferraro17 jferraro17 is offline
Opulence, I has it...
 
Join Date: Jan 2005
Location: TX
Posts: 830
Default Push Rod Drill Jig

Anybody in the north-DFW area have one of these "round-stock centering" jigs that I could borrow? I'm going to re-accomplish my push rods...the first attempt without the jig didin't turn out too well.

Please let me know-

Thanks
__________________
Joe Ferraro
DFW, VAF #17


SOLD
Reply With Quote
  #2  
Old 10-09-2007, 12:58 PM
bullojm1's Avatar
bullojm1 bullojm1 is offline
 
Join Date: Feb 2006
Location: Baltimore, MD
Posts: 1,039
Default

Joe-


I made my own with some scrap angle and a drill press vice. Worked great. Check it out:

http://rvplane.com/?categoryid=3&dayid=311
__________________
Mike Bullock
RV-7, Flying!
http://www.rvplane.com
EAA Technical Counselor
The Best FAA N-Number Availability Search Engine -TailNum.com
Reply With Quote
  #3  
Old 10-09-2007, 06:42 PM
Jerry Cochran's Avatar
Jerry Cochran Jerry Cochran is offline
 
Join Date: Jan 2005
Location: Sherwood, Oregon
Posts: 981
Default Centering Jig

Quote:
Originally Posted by jferraro16 View Post
Anybody in the north-DFW area have one of these "round-stock centering" jigs that I could borrow? I'm going to re-accomplish my push rods...the first attempt without the jig didin't turn out too well.

Please let me know-

Thanks
Harbor Freight has these. I bought one on sale less than $10. Works great, has slots for drill press, etc.

Jerry
Reply With Quote
  #4  
Old 10-09-2007, 06:50 PM
Jerry Cochran's Avatar
Jerry Cochran Jerry Cochran is offline
 
Join Date: Jan 2005
Location: Sherwood, Oregon
Posts: 981
Default On Sale $5.99

Every builder should have one or two...

http://www.harborfreight.com/cpi/cta...emnumber=92046

Jerry
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:10 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.