|
-
POSTING RULES
-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|
09-10-2020, 08:25 AM
|
|
|
|
Join Date: Oct 2012
Location: Prospect, KY
Posts: 65
|
|
Tach Transducer
Is anyone aware of a tach transducer that would attach to the standard mechanical tach output on a Lycoming engine that would be compatible with Dynon products?
Thanks,
Brad
|
09-10-2020, 10:35 AM
|
 |
|
|
Join Date: Feb 2008
Location: Largo, FL
Posts: 1,027
|
|
Also interested
Since I am dead on one side with my Surefly mag. Currently picking off the tach signal from my p-leads at the key switch.
Ron
__________________
RV-10 Co-built, maintained, flown (sold)
RV-8A Maintained and flown (Sold)
RV-6A Bought and Flying (N177RV), upgrades $$$
IO360, 180HP/CS, AFS 5600T, D10A, G650, G430, G327, ADS-B, VIZ385 AP
Very Happy Contributor
Comm, SMEL, CFII, A&P
Based at KCLW (Clearwater, FL)
|
09-10-2020, 10:45 AM
|
|
|
|
Join Date: Feb 2008
Location: Calgary, Alberta
Posts: 999
|
|
Vans list it under engine instruments
IE VTACHGEN 12
__________________
Ralph
built a few RVs, rebuilt a few more, hot rodded some, & maintained/updated a bunch more
|
09-10-2020, 11:05 AM
|
 |
Senior Curmudgeon
|
|
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,408
|
|
Dont know about Dynon, but the one Vans sells worked just fine with my GRT units.
__________________
Mike Starkey
VAF 909
Rv-10, N210LM.
Flying as of 12/4/2010 
Phase 1 done, 2/4/2011
Sold after 240+ wonderful hours of flight.
"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
|
09-10-2020, 02:39 PM
|
 |
|
|
Join Date: Jan 2007
Location: fort myers fl
Posts: 945
|
|
the vans unit does work with a skyview. i ran it for a while when I first installed my skyview.
bob burns
RV-4 N82RB
|
09-10-2020, 04:04 PM
|
|
|
|
Join Date: Mar 2007
Location: Sonoma County
Posts: 3,821
|
|
Try Van's first..... It's $55 cheaper
__________________
VAF #897 Warren Moretti
2019 =VAF= Dues PAID
|
09-15-2020, 08:26 AM
|
|
|
|
Join Date: Oct 2012
Location: Prospect, KY
Posts: 65
|
|
Tach Transducer
Thanks All!!
Brad
|
09-15-2020, 10:41 AM
|
|
|
|
Join Date: Aug 2007
Location: Ontario, Canada
Posts: 2,280
|
|
The suggestion to use the Van's and UMA senders is a good one. BUT... I had two of them fail in quick succession when mounted directly to the accessory case. I bought a 12" tach drive cable from ACS and mounted the sender to a bracket on the firewall where it has happily lived for the past decade without a hiccup.
|
09-15-2020, 11:04 AM
|
|
|
|
Join Date: Feb 2008
Location: Calgary, Alberta
Posts: 999
|
|
Check Van's online store to confirm, I think the IE VTACHGEN 12 comes with the 12" cable.
__________________
Ralph
built a few RVs, rebuilt a few more, hot rodded some, & maintained/updated a bunch more
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 04:55 PM.
|
