|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

05-29-2020, 09:55 PM
|
 |
|
|
Join Date: Jul 2016
Location: Worland, Wyoming
Posts: 1,365
|
|
Quote:
Originally Posted by Caveman
|
Yep that was pointed out to me but I'm glad you linked the one you did as it is a bit more current. I was looking for something too specific it would appear. 1/4 lists 96-106 in-lbs (unless otherwise specified) which corresponds to what I have seen in other documents. I installed my vac pad alternator today and was able to torque three out the of the four nuts. No way in heck was it happening on the fourth. Had to resort to the German method on that one.
__________________
Jereme Carne
PPL
RV-7A Emp. done
Wings done
Fuselage done
Finish kit almost done
Exempt but gladly paying!
|

05-30-2020, 05:58 AM
|
|
|
|
Join Date: Sep 2007
Location: Central IL
Posts: 5,516
|
|
Vacuum Cover plate Gasket??
Quote:
Originally Posted by jcarne
Yep that was pointed out to me but I'm glad you linked the one you did as it is a bit more current. I was looking for something too specific it would appear. 1/4 lists 96-106 in-lbs (unless otherwise specified) which corresponds to what I have seen in other documents. I installed my vac pad alternator today and was able to torque three out the of the four nuts. No way in heck was it happening on the fourth. Had to resort to the German method on that one.
|
Just curious, did the cover plate have a gasket under it? I installed and flew my M1B (from Vans) and had this last oil leak that needed repair (100 hrs). I found my plate did not have a gasket. It was installed, torqued from the factory so I did not remove it. But NO gasket - - yours??
__________________
Bill
RV-7
Lord Kelvin:
“I often say that when you can measure what you are speaking about,
and express it in numbers, you know something about it; but when you
cannot measure it, when you cannot express it in numbers, your knowledge
is of a meager and unsatisfactory kind.”
|

05-30-2020, 08:04 AM
|
 |
|
|
Join Date: Jul 2016
Location: Worland, Wyoming
Posts: 1,365
|
|
Quote:
Originally Posted by BillL
Just curious, did the cover plate have a gasket under it? I installed and flew my M1B (from Vans) and had this last oil leak that needed repair (100 hrs). I found my plate did not have a gasket. It was installed, torqued from the factory so I did not remove it. But NO gasket - - yours??
|
Yep it had a gasket but while searching I read somewhere else that they did not have a gasket, identical to your situation. I wonder why mine did but a couple others did not...
__________________
Jereme Carne
PPL
RV-7A Emp. done
Wings done
Fuselage done
Finish kit almost done
Exempt but gladly paying!
|

05-30-2020, 08:14 AM
|
 |
|
|
Join Date: Dec 2014
Location: Just Minutes from KBVI!
Posts: 1,039
|
|
I can't find the Lycoming Direct Drive Overhaul Manual on Lycoming's site. I see a few places online that have old (very old in some cases) versions for free, and some places that are charging for copies of unknown date, but nothing at Lycoming.
I have to be missing something here. Does Lycoming call it something different now?
|

05-30-2020, 08:25 AM
|
 |
|
|
Join Date: Jul 2016
Location: Worland, Wyoming
Posts: 1,365
|
|
Quote:
Originally Posted by 1001001
I can't find the Lycoming Direct Drive Overhaul Manual on Lycoming's site. I see a few places online that have old (very old in some cases) versions for free, and some places that are charging for copies of unknown date, but nothing at Lycoming.
I have to be missing something here. Does Lycoming call it something different now?
|
I just got sent one from someone who seems pretty dang knowledgeable, possibly used to work there? and it is dated 1974. If you PM me your email I'll send you two docs.
__________________
Jereme Carne
PPL
RV-7A Emp. done
Wings done
Fuselage done
Finish kit almost done
Exempt but gladly paying!
|

05-30-2020, 08:52 AM
|
 |
|
|
Join Date: Dec 2014
Location: Just Minutes from KBVI!
Posts: 1,039
|
|
Quote:
Originally Posted by jcarne
I just got sent one from someone who seems pretty dang knowledgeable, possibly used to work there? and it is dated 1974. If you PM me your email I'll send you two docs.
|
I was able to find one dated 1974 with updates as new as 2002, but nothing newer. Maybe that's as good as it gets? Here's what I found, consider it hosted at my site:
https://www.brunbergs.net/wp-content...al-2002-ed.pdf
https://www.brunbergs.net/2020/05/30...erhaul-manual/
Last edited by 1001001 : 05-30-2020 at 08:56 AM.
|

05-30-2020, 09:02 AM
|
 |
|
|
Join Date: Jul 2016
Location: Worland, Wyoming
Posts: 1,365
|
|
Quote:
Originally Posted by 1001001
|
The one I have is current revision 2010.
__________________
Jereme Carne
PPL
RV-7A Emp. done
Wings done
Fuselage done
Finish kit almost done
Exempt but gladly paying!
|

05-30-2020, 09:16 AM
|
 |
|
|
Join Date: Dec 2014
Location: Just Minutes from KBVI!
Posts: 1,039
|
|
Quote:
Originally Posted by jcarne
The one I have is current revision 2010.
|
If you'd send it to me I'd appreciate it! will send PM
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 06:56 AM.
|