question re; mounting flyLed boards

[Desert Rat]

For the FlyLED nav/strobe boards, the instructions suggest just sticking them on with a double sided tape like what would be used for automotive trim.

Does that work ok or are most folks doing the alternate method i.e. drill a couple of holes through a non critical part of the board for screws?

[krhea]

i used epoxy and flox to mount a couple of nut plates on the front centerline and side centerline and top and bottom of corners of cutouts, 1 fly led board keeps the other from going anywhere. Landing light board has three screw holes, and position and stobe has one hole.

Keith Rhea
Rv7
2020 Dues

[tomkk]

I used screws & nutplates ...

[Electrogunner]

I used 3M double sided tape with no issues. No need to overthink it here.

[ty1295]

3M tape is working fine for me, slightly not as easy to pull and work on them but no issues with them moving.

[mr.sun]

I also used the automotive double stick tape. Working well still after a year.

[Desert Rat]

Thanks guys.