VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 04-21-2020, 09:41 AM
DonFromTX's Avatar
DonFromTX DonFromTX is offline
 
Join Date: Oct 2010
Location: La Feria Texas
Posts: 3,822
Default SLSA Condition Inspection

I am doing my very first ever SLSA condition inspection (I am an A&P)and have some questions. Previous log book entries claim all ADs were researched and complied with, the aircraft was found to be airworthy and returned to service and "complied with 100 hour inspection" even though it has never been used except by the pilot owner for personal use.
Somewhere I thought I had understood that an SLSA cannot be found airworthy and ADs are not issued on them. Is there some information on SLSA that I am missing? Nothing in the operational limitations mention any of this.
__________________
A&P, PP-SEL, Pathological Flier, EAA Technical Counselor
EAA Chapter 595 President,http://www.595.eaachapter.org/index.htm
Retired US Army Officer
Reply With Quote
  #2  
Old 04-21-2020, 12:29 PM
jrtens's Avatar
jrtens jrtens is offline
 
Join Date: Apr 2018
Location: Utah
Posts: 96
Default

You are correct. The previous logbook entry is not correct.
Although an AD is not precluded on an SLSA, it is not common. Safety issues are addressed by the manufacturer with Safety Directives and Service Bulletins.
It is possible to have an AD on a component and the manufacturer would most likely issue a safety directive to comply with it.

The term is annual condition inspection and the logbook entry does not have to mention ADs or safety directives although it is part of the inspection to check them. They should have already been entered in the logbook when they were complied with.

Here is a sample logbook entry for the annual condition inspection.

"I certify that this aircraft has been inspected IAW the Vans RV-12 MM inspection procedures and is found to be in a condition for safe operation."

Same for the engine and propeller with the appropriate MM or ICA reference.
__________________
Jon
12iS SLSA
Salt Lake Int'l

Last edited by jrtens : 05-09-2020 at 11:12 AM.
Reply With Quote
  #3  
Old 04-21-2020, 01:57 PM
jrtens's Avatar
jrtens jrtens is offline
 
Join Date: Apr 2018
Location: Utah
Posts: 96
Default

Note also that the Rotax engine requires inspection at 100 hours or 12 months, whichever comes first. So you could have a situation where the aircraft and engine condition inspections do not coincide.
__________________
Jon
12iS SLSA
Salt Lake Int'l
Reply With Quote
  #4  
Old 04-21-2020, 03:04 PM
rvbuilder2002's Avatar
rvbuilder2002 rvbuilder2002 is offline
 
Join Date: Jul 2005
Location: Hubbard Oregon
Posts: 9,026
Default

For expanded detail on the subject beyond what Jon (correctly) provided, you could look through my power point presentation titled A&P's and the non-type certificated aircraft

https://www.vansaircraft.com/wp-cont...raft-preso.pdf
__________________
Opinions, information and comments are my own unless stated otherwise. They do not necessarily represent the direction/opinions of my employer.

Scott McDaniels
Van's Aircraft Engineering Prototype Shop Manager
Hubbard, Oregon
RV-6A (aka "Junkyard Special ")
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:29 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.