Put that 3D printer in your airplane shop to good use for medical personnel

[BobbyLucas]

Originally Posted by dreed

Bobby- Sorry! I can't seem to figure out how to get that to a printable file (I did say I was clueless on the design) .

Do you have the .stl files or mind shooting me that so I can toss it in a slicer?

Thanks again!!!!
dan

Files are here: https://www.thingiverse.com/funbobby2001/designs

[daniel_hagan]

Originally Posted by philip_g

how are you guys finding facilities to accept these? I can find orgs looking for home made masks, but I haven't found any accepting face shields or these

I could use a few for my staff ... we have to "figure 8" the ear straps in order to
tighten the jaw area which destroys your ears (lower cord to top of ear or one spin on the straps). I believe we are the last outpatient ultrasound imaging
facility operating in El Paso currently and do so to keep the threatened miscarriage, ectopic pregnancies and blood clot to the leg patients (DVT) out of the ERs.

I only need 5 max if anyone can send them, they'd truly be appreciated. Another person on another site is offering us face shields also 3-D printed which I'm not sure we need just yet as El Paso still has a relatively low exposure factor.

[Steve Melton]

Originally Posted by daniel_hagan

I could use a few for my staff ... we have to "figure 8" the ear straps in order to
tighten the jaw area which destroys your ears (lower cord to top of ear or one spin on the straps). I believe we are the last outpatient ultrasound imaging
facility operating in El Paso currently and do so to keep the threatened miscarriage, ectopic pregnancies and blood clot to the leg patients (DVT) out of the ERs.

I only need 5 max if anyone can send them, they'd truly be appreciated. Another person on another site is offering us face shields also 3-D printed which I'm not sure we need just yet as El Paso still has a relatively low exposure factor.

send me $8.30 to cover shipping and your address and I will send you a hundred.

[dreed]

Bobby thank you very much! I love this community! I've already got the Notre Dame on the printer.

These will be a huge hit with my buddies! I have 150 of the standards to deliver today/tomorrow but I'll get these printed up as a surprise for them too.

I'll make sure to report back here once delivered.

Dan

[philip_g]

Originally Posted by daniel_hagan

I could use a few for my staff ... we have to "figure 8" the ear straps in order to
tighten the jaw area which destroys your ears (lower cord to top of ear or one spin on the straps). I believe we are the last outpatient ultrasound imaging
facility operating in El Paso currently and do so to keep the threatened miscarriage, ectopic pregnancies and blood clot to the leg patients (DVT) out of the ERs.

I only need 5 max if anyone can send them, they'd truly be appreciated. Another person on another site is offering us face shields also 3-D printed which I'm not sure we need just yet as El Paso still has a relatively low exposure factor.

Same for you, if Steve doesn't get you sorted out I will tomorrow

[dreed]

I am happy to toss some in the mail today if someone closer doesn't get them to you. I am in the Portland, OR area so may take a few days to arrive.

[daniel_hagan]

Originally Posted by Steve Melton

send me $8.30 to cover shipping and your address and I will send you a hundred.

Not sure how to do that, I don't have paypal or any of those electronic payment means. I can send cash back to you after it is received and I have your address, you can confirm the physical address and our website below.

Many of the other healthcare workers would be interested outside of my crew, so any extras are appreciated (I have 8 staff total, but am near hundreds across the street from me at both hospitals as well as the nearby sierra hospital). Info is below if this is acceptable:

Hagan Imaging
ATTN Dan Hagan
1800 N. Mesa, Suite 101
El Paso, TX 79902
Website: Haganimaging(dot com) has my phone number as well at the website if you need to go voice.

[Steve Melton]

Originally Posted by daniel_hagan

Not sure how to do that, I don't have paypal or any of those electronic payment means. I can send cash back to you after it is received and I have your address, you can confirm the physical address and our website below.

Many of the other healthcare workers would be interested outside of my crew, so any extras are appreciated (I have 8 staff total, but am near hundreds across the street from me at both hospitals as well as the nearby sierra hospital). Info is below if this is acceptable:

Hagan Imaging
ATTN Dan Hagan
1800 N. Mesa, Suite 101
El Paso, TX 79902
Website: Haganimaging(dot com) has my phone number as well at the website if you need to go voice.

they are on the way.

USPS: 9405503699300326007683

give my regard to Lucy's Restaurant. best Taco's around.

[DaleB]

Managed to kill my hotend after a couple days of steady printing. It was fine with PLA, but the higher temperature required for PETG did it in. My remaining PLA is too hard and dry to feed properly. I've got parts on order to fix the printer and resume spitting them out.

So far everyone who I've given these to have been very happy to see them... I hope to have them all distributed by tonight.

[Tom Gan]

Checked with my local hospital if they could use them and they replied we will take as many as you can make, so I cranked up my prusa today. It seems that with the shortage of commercial masks there are allot of donations pouring in that are making them out of cloth so they may not have elastic bands and need to be tied, so I think this may make things simpler. Anyway, glad to help and put the filament to good use.