|
-
POSTING RULES
-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|
02-09-2020, 05:01 PM
|
 |
|
|
Join Date: Jan 2019
Location: Vaca Moo Airport - TA37 in East TEXAS
Posts: 1,331
|
|
Does anyone have the part number to order a RV-8 gascolator o-ring from Van's or preferably Aircraft Spruce since I'm about to send in an order?
__________________
RV-8 N52VM: OnSpeed Gen2 AOA-3D, Dynon D-180, Autopilot, Titan 0-360A1A, Hartzell C/S, INS-429 IFR & GPS496, WingX & Stratux for backup & ADS-B IN. Enjoying life while building an airpark with FREE campsite for pilots www.facebook.com/VacaMooAirport/
Exempt by 3 out of the 10 ways but I still donated.
Last edited by Pilot135pd : 02-09-2020 at 05:04 PM.
|
02-09-2020, 05:40 PM
|
|
|
|
Join Date: Apr 2008
Location: Riley TWP MI
Posts: 3,068
|
|
Not sure but educated guess
Van's GAS-3-4-5 GASKET
Aircraft Spruce 05-12242
__________________
Joe Gores
RV-12 Flying
|
02-09-2020, 05:43 PM
|
|
|
|
Join Date: Jan 2019
Location: Vaca Moo Airport - TA37 in East TEXAS
Posts: 1,331
|
|
Quote:
Originally Posted by Mich48041
Not sure but educated guess
Van's GAS-3-4-5 GASKET
Aircraft Spruce 05-12242
|
I think that's for the newer engines. I think I just asked in the wrong forum section because I might have a different gascolator than you. Thanks.
__________________
RV-8 N52VM: OnSpeed Gen2 AOA-3D, Dynon D-180, Autopilot, Titan 0-360A1A, Hartzell C/S, INS-429 IFR & GPS496, WingX & Stratux for backup & ADS-B IN. Enjoying life while building an airpark with FREE campsite for pilots www.facebook.com/VacaMooAirport/
Exempt by 3 out of the 10 ways but I still donated.
|
03-02-2020, 02:50 PM
|
|
|
|
Join Date: Oct 2014
Location: Port Orange FL
Posts: 28
|
|
lock-open gascolator drain
I bought a lock-open fitting for my gascolator drain because I had one or a couple of other airplanes and liked it. But when I tried to install it on my RV-12 there was interference which kept me from doing so. It was a while ago and I don't recall for sure what the problem was. I think there wasn't enough clearance for the side rods on the fitting to allow turning it to thread it in with the bowl in place, and I didn't want to be stuck with needing to take the bowl off to remove/install it in the future.
__________________
RV-12 #120768, first flight Sept. 2016
245 hrs as of 2/1/2020
|
03-02-2020, 03:05 PM
|
|
|
|
Join Date: Jan 2019
Location: Vaca Moo Airport - TA37 in East TEXAS
Posts: 1,331
|
|
Quote:
Originally Posted by Charlie12
I bought a lock-open fitting for my gascolator drain because I had one or a couple of other airplanes and liked it. But when I tried to install it on my RV-12 there was interference which kept me from doing so. It was a while ago and I don't recall for sure what the problem was. I think there wasn't enough clearance for the side rods on the fitting to allow turning it to thread it in with the bowl in place, and I didn't want to be stuck with needing to take the bowl off to remove/install it in the future.
|
How do you clean the screen without taking it apart? 
__________________
RV-8 N52VM: OnSpeed Gen2 AOA-3D, Dynon D-180, Autopilot, Titan 0-360A1A, Hartzell C/S, INS-429 IFR & GPS496, WingX & Stratux for backup & ADS-B IN. Enjoying life while building an airpark with FREE campsite for pilots www.facebook.com/VacaMooAirport/
Exempt by 3 out of the 10 ways but I still donated.
|
03-02-2020, 03:07 PM
|
|
|
|
Join Date: Jan 2019
Location: Vaca Moo Airport - TA37 in East TEXAS
Posts: 1,331
|
|
Quote:
Originally Posted by Mich48041
Not sure but educated guess
Van's GAS-3-4-5 GASKET
Aircraft Spruce 05-12242
|
BTW you were correct, it was that part. Apparently for the past, I don?t remember what he told me years, they?re using the same size gascolator and just changed the outside. Thanks !
__________________
RV-8 N52VM: OnSpeed Gen2 AOA-3D, Dynon D-180, Autopilot, Titan 0-360A1A, Hartzell C/S, INS-429 IFR & GPS496, WingX & Stratux for backup & ADS-B IN. Enjoying life while building an airpark with FREE campsite for pilots www.facebook.com/VacaMooAirport/
Exempt by 3 out of the 10 ways but I still donated.
|
03-04-2020, 09:23 AM
|
|
|
|
Join Date: Oct 2009
Location: Birmingham, Alabama
Posts: 134
|
|
If you can't cope with machinery, improve it.
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 05:23 PM.
|
