VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Avionics / Interiors / Fiberglass > Electrical Systems
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #31  
Old 12-03-2019, 05:20 PM
azrv6's Avatar
azrv6 azrv6 is offline
 
Join Date: Mar 2006
Posts: 179
Default

Refreshing this three year old thread. The 35 amp alternator in my RV6, which has been working just fine for 23 years, decided it had enough. So, I am on the hunt for a replacement.

Have checked on line and the part numbers listed for Napa and O'Reilly in the previous post (probably 14129 instead of 14184) are active, pick up next day in store, so will most likely go that route.

Anyone been down this path recently with updated information?
__________________
Dave Binkley
RV-6, O-360-A1A, C/S
1932 Monocoupe 110, Warner 145 (http://gobinkley.com)
Sedona, AZ
Reply With Quote
  #32  
Old 12-03-2019, 06:07 PM
cojaken cojaken is offline
 
Join Date: Oct 2005
Location: Tulsa, OK
Posts: 51
Default

Here's an excerpt for a post I made some time ago about replacing an alternator supplied by Vans:

"I decided to buy a re-manufactured alternator from Denso which is the new name for the original manufacturer. These alternators are not made new by them any more. The alternator I believe is the closest replacement is part # 210-0637 http://densoautoparts.com 1987 Suzuki Samurai. I hoped the best quality re-manufacture would come from the original manufacturer.

I did have to file 3mm off the bracket the alternator mounts to, but I believe this was probably due to inaccuracy in the alternator housing casting rather than a different spec.

I ground ran the engine yesterday and flew it today with no overvoltage issues at all. I am not sure if my logic was correct but the result seems to be good."

I have ~40 hours on the replacement alternator now and all looks good.
__________________
Colin
RV-9A, purchased, flying
Reply With Quote
  #33  
Old 01-13-2020, 07:29 AM
z987k z987k is offline
 
Join Date: Mar 2017
Location: Alaska
Posts: 38
Default

Is there a source for case mount(narrow deck) brackets? B&C seems to be out and I'm not sure who else makes them.

On that note the standard brackets more or less fit up to the alternator listed?
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:27 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.