For those of you that did EFI (I'm doing SDS if that matters), is there any use for the fuel filter and FloScan brackets which the stock plans have you put at the bottom of the tunnel?
Wondering if its handy to use these for anything or should I just dimple and fill with a rivet?
__________________
Dr. Mark Ciaglia
The Woodlands, TX
Donating Monthly since 10/17
N189PT- Christen Eagle II
N627DG (reserved)- RV10 in the making www.marksfamilyrv10.wordpress.com
You never know, you may be able to use those parts for other things too.
One thing that comes to mind is Ed Krantz used one of the fuel filter brackets to mount the Aerosport NACA vent controller to a j-channel stringer in the battery area.
I modified the bracket to accept a couple of adel clamps to hold the fuel lines.
__________________
______________________
Randy P.
1st time builder
RV10 - QB wings and fuse. Working on cabin top
St. Albert, Alberta, Canada
Reserved:C-GRPY
Tunnel floor brackets on EFI aircraft
Linear Mode
