Primer
Quote:
Originally Posted by Rocktaupo
I will be priming the inside of my '12 as I build.
Is there any benefit to priming the outside at the same time? Easier than priming the completed airframe? Or will there likely be too much touch up to do after completion?
|
Not if you plan to have a paint shop paint it. They will strip it. If you plan to paint, choose a primer compatible with your finish paint but you'll have to scuff it.
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 12/03/2019, plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
|