ROUND GEAR (RV-4,6 ) Jacking Kit

[RV7 To Go]

On both my 4 and 7, I wrapped electrical tape around the gear leg just above the bend and installed a gear (hose) clamp around the gear leg (a wide one not the narrow one) with the screw at the bottom. This fits under the wheel pant intersection fairing below the gear leg fairing and can be left on the plane. Then just use a jack under the screw head of the clamp to raise the plane far enough to remove the wheel. Has worked like a charm for the last 6 years and many tire changes.

[RV Jerry]

Have done the same to on my Rockets for many year although haven?t used tape
Works great ,have also done the same on other than round gear legs