VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #101  
Old 04-28-2019, 11:39 AM
RV7ForMe RV7ForMe is offline
 
Join Date: Jul 2015
Location: Europe
Posts: 647
Arrow #59

Well, the rebuild RV7A is complete and so I return to building a few parts that I have given buddy so that he can fly this summer... Like the VS.

Yup I just build my second one of these.

You would think it would go a lot quicker, but for some reason that was not really the case. With Priming and de burring all in was about 20 hours. Even though I knew what I was doing this time around and didn't have to think about it to much... So for those of you that have stated they can build a whole empennage in a weekend. I wonder how much de burring is included in that.

Or I am simply very slow.

__________________
VAF dues paid for 2021
RV7-A (N137MX Reserved) - Wings Started...
RV7-A - Rebuild Done - Flying!
Cessna Rocket 210HP - Best dang 172 Ever made! (sold)
Reply With Quote
  #102  
Old 05-06-2019, 06:13 AM
RV7ForMe RV7ForMe is offline
 
Join Date: Jul 2015
Location: Europe
Posts: 647
Arrow #60

While rebuilding the the other plane I got to fast forward quite a bit into cable, connectors and avionics. Gave me a lot to think about. I had been trying to not do that because buying avionics early is kind of silly...But they are so much fun!

Anyway. We replaced a few connectors and while doing so I got to try out a few different kinds and that was great because I know what I like and what I do not like.

I like the DEUTSCH series connectors. They feel nice and are good to work with.
But at some point we had to figure out how to attach them to the air-frame so they don't move around. Double sided tape will do the trick but since I build this 80$ china 3D printer I had to put that use. I have never designed any parts. So this is my first try.

I am printing ABS and use the "raft" to stabilize the print. In this case the raft takes longer to print then the part but it does work well.


First print in coarse quality. The holes are to attache with pop rivets to a rib or similar structure.


With the connector attached.


Fit is very tight. I don't think it is going anywhere.


fun little 3 hour project. Necessary? probably not but what else am I going to do with this printer?
__________________
VAF dues paid for 2021
RV7-A (N137MX Reserved) - Wings Started...
RV7-A - Rebuild Done - Flying!
Cessna Rocket 210HP - Best dang 172 Ever made! (sold)
Reply With Quote
  #103  
Old 07-08-2019, 05:08 PM
RV7ForMe RV7ForMe is offline
 
Join Date: Jul 2015
Location: Europe
Posts: 647
Arrow #61

Been a while since I made any progress on "MY" RV.

But, a lot has happened:

Remember why we do those "simulated" engine out trainings on our BFR's? Well, I do one every year either for club currency or for the rating and while it is all well it doesn't compare to the real thing! At 250h total time I am a just starting and I know it is a risk but never really thought it would actually happen...

A few weeks ago I was PIC in a friends good old 152. He had to give up his medical for a bit (already has it back) but still wanted to fly so he asked me to fly him around in his plane. He is over twice my age but we have fun sharing one of the best hobbies out there.

It was a hot day, we were close to MTOW and climb was pretty slow. A few minutes later just shy of 2000ft still at WOT the engine sound changed. A quick glance at the gauge: 1500RPM with everything full forward. "OH SH**"

I tried to trouble shoot while getting that adrenaline rush you would expect. Everything happened so quick. I lost about 600ft when I realized I will have to put her down NOW. I was maybe 1000ft-1200ft AGL. Looked left, picked a place and called a mayday and set up for landing. I still had partial power until I shut her down before touch down. I never thought it would happen but it did. I am pretty thankful it was a C152.

So I was just really lucky that nobody got hurt. Happy to be here!
__________________
VAF dues paid for 2021
RV7-A (N137MX Reserved) - Wings Started...
RV7-A - Rebuild Done - Flying!
Cessna Rocket 210HP - Best dang 172 Ever made! (sold)
Reply With Quote
  #104  
Old 07-08-2019, 06:14 PM
BCP Boys's Avatar
BCP Boys BCP Boys is offline
 
Join Date: Oct 2011
Location: Kennesaw, Ga
Posts: 879
Default Nice Job

Glad you all are okay and you had a field to land in. Looks like you did a great job and didn't even tear up the vegetation! Great job.
__________________
Amir
----------
RV-7 - Regretfully Sold
RV-10 - Sold

Supporting VAF since the first visit
Reply With Quote
  #105  
Old 07-08-2019, 08:19 PM
mdevans9 mdevans9 is offline
 
Join Date: Jan 2006
Location: Hockessin,Delaware
Posts: 227
Default Great Job!

Way to go!

Best,

Merrill
__________________
Merrill D. Evans
RV-7
N87EM
Reply With Quote
  #106  
Old 07-08-2019, 08:40 PM
dreed dreed is offline
 
Join Date: Nov 2016
Location: Camas, WA
Posts: 503
Default

Oof! That stinks, but really glad you two are both OK and it looks like the old bird is pretty good too. Any idea what was the cause of loss of power yet?
__________________
Dan Reed
Camas, WA
RV-7A - N167DR
First flight 5/25/2021
Phase 1
2018/19/20 VAF dues paid
Reply With Quote
  #107  
Old 07-08-2019, 09:53 PM
mbauer mbauer is offline
 
Join Date: Nov 2015
Location: Nikiski, AK
Posts: 461
Default Awesome Landing!

Glad you are OK.

Not much damage to anything, farmer's field; not much damage at all.

Did you have any issue with direction control? Looks like you handled the "soft field" very well!

Best regards,
Mike Bauer
__________________
Mike Bauer
N999SN 1998 Syd Nelson RV-6 (purchased 2017)
UTC -09:00 Alaska
Reply With Quote
  #108  
Old 07-08-2019, 10:03 PM
jcarne's Avatar
jcarne jcarne is offline
 
Join Date: Jul 2016
Location: Worland, Wyoming
Posts: 1,981
Default

Wow, glad to hear you are all good. Great job keeping it together for a nice landing!
__________________
Jereme Carne
PPL
RV-7A Flying as of 03/2021
Exempt but gladly paying!
Reply With Quote
  #109  
Old 07-08-2019, 10:11 PM
Scott Hersha Scott Hersha is offline
 
Join Date: Jan 2005
Location: Cincinnati, OH
Posts: 2,013
Default

Way to go!! One of the best instructors I had during the countless semi-annual checkrides I had to take told me - it doesn?t matter what happened to cause an abnormal or emergency situation or what procedure you followed - but if you can put the airplane down without injuring anybody or bending any metal, whatever you did was good and acceptable. It is incredibly hard to argue with success, and whatever you did was successful.
__________________
SH
RV6/2001 built/sold 2005
RV8 Fastback/2008 built/sold 2015
RV4/bought 2016/sold/2017
RV8/2018 built/Sold(sadly)
RV4/bought 2019 Flying
RV6/Used kit purchased 2021 building
Cincinnati, OH/KHAO
JAN2021
Reply With Quote
  #110  
Old 07-09-2019, 07:51 AM
MarkW's Avatar
MarkW MarkW is offline
 
Join Date: Sep 2011
Location: Edgewater, FL. X50
Posts: 1,176
Default

Nicely done,
Glad to see you followed your training.
Unfortunately many of the fatalities we read about are simple emergencies followed by a stall.
It is very difficult to fight the natural urge to pull the stick/yoke back.
Again well done sir.
__________________
Mark
RV9 - N14MW - Flying
G3X - ECI Titan I0-320
Catto three blade prop
http://www.mykitlog.com/MarkW
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:36 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.