VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 06-18-2019, 11:50 AM
SteveL SteveL is offline
 
Join Date: Feb 2014
Location: Granbury, Tx
Posts: 30
Default Pitot/aoa tube routing

I'm not really happy with the pitot/aoa tube routing through the spar. Looks like too sharp of a bend and even worse if I were to use the snap bushing. What have others done in this area?
Thanks,Steve
Reply With Quote
  #2  
Old 06-18-2019, 12:41 PM
rvator51's Avatar
rvator51 rvator51 is offline
 
Join Date: Jan 2005
Location: Peoria, AZ
Posts: 1,053
Default

A thought is you could use a 90 degree safe air connector if you think the bend is too sharp.
http://www.cleavelandtool.com/Plumbi...uctinfo/SA-A3/
__________________
Regards,

Thomas Velvick
Goodyear, AZ (KGYR)

2020 Donation sent.

N53KT RV-6a finished 2018, Flying
N7053L RV-4 Wife's RV
N56KT RV-4 Finishing

Last edited by rvator51 : 06-18-2019 at 12:44 PM.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:37 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.