The wing bolts are close tolerance bolts, which means the plating on them is thinned by the fact of installing (and removing) them. They are not that expensive, I would use new bolts.
__________________
Terry Edwards
RV-9A (Fuselage)
2020/2021 VAF Contribution Sent
I would inspect the bolts and consult Vans. Highly likely you can reuse them. They are not stressed like a connecting rod bolt!!
__________________
Bill
RV-7
Lord Kelvin:
“I often say that when you can measure what you are speaking about,
and express it in numbers, you know something about it; but when you
cannot measure it, when you cannot express it in numbers, your knowledge
is of a meager and unsatisfactory kind.”
RV10 wing bolts
Linear Mode
