Page 7-16 and figure 7-24 of the Lycoming O/H manual says to check crankshaft end play, dimensions A and B, and the fix is to grind the oil slinger if it's not within. I wonder what the odds are of having to do that if I'm installing a new crankshaft and case on my overhaul. Thanks for any help from anyone that's been down that road, JJ.
very, very, very small....
Merry Christmas,
Mahlon
__________________
"The opinions and information provided in this and all of my posts are hopefully helpful to you. Please use the information provided responsibly and at your own risk."
O-320D2J crankshaft end play, thrust surface.
Linear Mode
