VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #21  
Old 01-18-2015, 07:31 PM
Bart Bart is offline
 
Join Date: Jan 2008
Location: Pecan Plantation (0TX1)
Posts: 167
Default

Larry, yes confirmed plus checked continuity. And agree it's terribly difficult to do this from the back.

I'm thinking either its a setting or the 1200 dollar ES upgrade might need a do-over.

Definitely wasted a whole weekend on this challenge.
Reply With Quote
  #22  
Old 01-19-2015, 09:12 AM
Bill.Peyton's Avatar
Bill.Peyton Bill.Peyton is offline
 
Join Date: Sep 2009
Location: St. Louis, MO
Posts: 1,788
Default

Bart
Do you have a return ground? The GPS must be receiving your position and the transmitter must be transmitting. Is your encoder talking to the 330? Is the squat switch set to no?
__________________
Bill Peyton
RV-10 - 1125 hrs
N37CP
First Flight Oct 2012
Aviation Partners, LLC
Reply With Quote
  #23  
Old 01-22-2015, 11:20 AM
Bart Bart is offline
 
Join Date: Jan 2008
Location: Pecan Plantation (0TX1)
Posts: 167
Default

To finish this issue off I'll pass all by the final corrective action to resolve our "no adsb" annunciation. Turns our wiring was fine. Our settings were right. The 430W system software was upgraded to 5.1 which should have done the trick. The problem arose when the GPS software (other card) went out of date. So an upgrade to 5.0 on the GPS card and the message disappeared. So lesson learned make sure both cards are up to date. Note: the first garmin tech said it (GPS software) wasn't the problem. A second call to Garmin (new tech) said it was indeed the problem.
Reply With Quote
  #24  
Old 01-22-2015, 11:54 AM
Mike S's Avatar
Mike S Mike S is offline
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,420
Default

Bart, glad you got the issue straightened out, and thanks for reporting back about the solution.

I moved this thread to Glass Cockpit, as it applies to more than just the 10 folks.
__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
  #25  
Old 10-22-2018, 08:46 PM
cojaken cojaken is offline
 
Join Date: Oct 2005
Location: Tulsa, OK
Posts: 54
Default

Quote:
Originally Posted by Bart View Post
To finish this issue off I'll pass all by the final corrective action to resolve our "no adsb" annunciation. Turns our wiring was fine. Our settings were right. The 430W system software was upgraded to 5.1 which should have done the trick. The problem arose when the GPS software (other card) went out of date. So an upgrade to 5.0 on the GPS card and the message disappeared. So lesson learned make sure both cards are up to date. Note: the first garmin tech said it (GPS software) wasn't the problem. A second call to Garmin (new tech) said it was indeed the problem.
I?m having the same issue. Does the above reference to ?an upgrade to 5.0 on the GPS card? mean an update of the terrain database please?
Reply With Quote
  #26  
Old 10-22-2018, 11:23 PM
BobTurner BobTurner is offline
 
Join Date: Dec 2011
Location: Livermore, CA
Posts: 6,797
Default

Quote:
Originally Posted by cojaken View Post
I?m having the same issue. Does the above reference to ?an upgrade to 5.0 on the GPS card? mean an update of the terrain database please?
Not the terrain database. The gps software.
Reply With Quote
  #27  
Old 10-27-2018, 08:38 PM
cojaken cojaken is offline
 
Join Date: Oct 2005
Location: Tulsa, OK
Posts: 54
Default

Thank you Bob. That explains it and also seems to have been the solution!
Reply With Quote
  #28  
Old 12-02-2018, 08:35 AM
Lux Wrangler Lux Wrangler is offline
 
Join Date: Feb 2005
Posts: 110
Default NO ADSB fault

I had my Garmin GTX 330 converted to es and wired it to a RS-232 port on my GNS 430w . I have tried several ways to set ADS-B out+ on the 430 and remote on the 330, I hope correctly. Integrity is set to 1E-7. ADS-B TX and EHS are enabled. Still I see NO ADSB fault on the 330.
__________________
Jim Peck
San Francisco Bay Area
RV-7
Reply With Quote
  #29  
Old 12-02-2018, 11:10 AM
Bill.Peyton's Avatar
Bill.Peyton Bill.Peyton is offline
 
Join Date: Sep 2009
Location: St. Louis, MO
Posts: 1,788
Default

Are you receiving gps data on the 430w. Does the 430W have the latest software release. If you are seeing the adsb+ option on the serial output, then you have the latest software... Do you have the proper data speed selected for both ports?
__________________
Bill Peyton
RV-10 - 1125 hrs
N37CP
First Flight Oct 2012
Aviation Partners, LLC
Reply With Quote
  #30  
Old 12-02-2018, 03:52 PM
Lux Wrangler Lux Wrangler is offline
 
Join Date: Feb 2005
Posts: 110
Default NO ADSB

Quote:
Are you receiving gps data on the 430w. Does the 430W have the latest software release. If you are seeing the adsb+ option on the serial output, then you have the latest software... Do you have the proper data speed selected for both ports?
__________________
Bill Peyton
Yes, I have the latest software (I should have mentioned that). I saw in the installation manual that the 330 is capable of a second speed, but I haven't found where to check/set that parameter. The 430 shows the normal good GPS data.
__________________
Jim Peck
San Francisco Bay Area
RV-7
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 03:59 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.