VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 10-21-2018, 10:20 AM
bryanflood's Avatar
bryanflood bryanflood is offline
 
Join Date: Aug 2006
Posts: 114
Default Io-540-D4A5 narrow deck

Hello all,

I am overhauling an IO-540-D4A5 narrow deck. It came with a two part camshaft. Unfortunately the parts catalogs I have only show the part numbers for the one piece camshaft. The overhaul manual has a picture of the two-piece cam but I need the part numbers for the hex head bolts, lockplate and spacer. Does anyone have an old Lycoming parts catalog to help identify these part numbers? And others I am running across?



https://postimg.cc/gwXPBMSJ

Thanks,

Bryan
Reply With Quote
  #2  
Old 10-21-2018, 10:30 AM
lr172 lr172 is offline
 
Join Date: Oct 2013
Location: Schaumburg, IL
Posts: 5,297
Default

Quote:
Originally Posted by bryanflood View Post
Hello all,

I am overhauling an IO-540-D4A5 narrow deck. It came with a two part camshaft. Unfortunately the parts catalogs I have only show the part numbers for the one piece camshaft. The overhaul manual has a picture of the two-piece cam but I need the part numbers for the hex head bolts, lockplate and spacer. Does anyone have an old Lycoming parts catalog to help identify these part numbers? And others I am running across?



https://postimg.cc/gwXPBMSJ

Thanks,

Bryan
I don't have a catalog that shows the two piece.

The bolts are just bolts and very few of these have part numbers. They are typically called out something like STD-5/16-18. The spacer is just to center the tach shaft and unlikely that it is worn, though you should be able to measure for out of round, as that is how it would likely wear. If you are using electronic RPM indication, I would leave the tach shaft and spacer out of the build and then get a cap to cover the area.

You should be able to call a parts house like ASI or Colorado air parts to get the # for the retainers. My cam was pitted and ended up moving to a one piece cam and the accy case re-machining.

Larry
__________________
N64LR - RV-6A / IO-320, Flying as of 8/2015
N11LR - RV-10, Flying as of 12/2019

Last edited by lr172 : 10-21-2018 at 10:32 AM.
Reply With Quote
  #3  
Old 10-21-2018, 10:37 AM
az_gila's Avatar
az_gila az_gila is offline
 
Join Date: Jan 2005
Location: 57AZ - NW Tucson area
Posts: 10,011
Smile

This is an old discusion on cams and gears for O-360's, but I believe the attach hardware is similar -

http://www.vansairforce.com/communit...d.php?t=133109
__________________
Gil Alexander
EAA Technical Counselor, Airframe Mechanic
Half completed RV-10 QB purchased
RV-6A N61GX - finally flying
Grumman Tiger N12GA - flying
La Cholla Airpark (57AZ) Tucson AZ
Reply With Quote
  #4  
Old 10-21-2018, 10:45 AM
Pdtofly Pdtofly is offline
 
Join Date: Jan 2012
Location: Reno, NV
Posts: 446
Default Call Ly-Con

Call Ly-Con. Not only would they have the part numbers, but I would expect they would have the parts and would sell them to you at a fair price.

They are great guys and they try to help when they can.

I have an old -540 parts and overhaul manual that should have the info you need, but wont be able to get to it for a week. If you don't get it before then, email me at hr2plt@yahoo.com and I will look it up for you then.

Brian

Last edited by Pdtofly : 10-21-2018 at 10:47 AM.
Reply With Quote
  #5  
Old 10-22-2018, 08:17 AM
659JR 659JR is offline
 
Join Date: Dec 2011
Location: delta, co
Posts: 204
Default cam and bolts

Lycoming SI1218A will give you all that info.

Jesse
Reply With Quote
  #6  
Old 10-23-2018, 12:39 PM
az_gila's Avatar
az_gila az_gila is offline
 
Join Date: Jan 2005
Location: 57AZ - NW Tucson area
Posts: 10,011
Exclamation

Quote:
Originally Posted by 659JR View Post
Lycoming SI1218A will give you all that info.

Jesse
Not on the Lycoming web site unfortunately, but a copy is here -

http://www.shortwingpipers.org/forum...ll=1#post49715
__________________
Gil Alexander
EAA Technical Counselor, Airframe Mechanic
Half completed RV-10 QB purchased
RV-6A N61GX - finally flying
Grumman Tiger N12GA - flying
La Cholla Airpark (57AZ) Tucson AZ
Reply With Quote
  #7  
Old 10-24-2018, 07:29 PM
bryanflood's Avatar
bryanflood bryanflood is offline
 
Join Date: Aug 2006
Posts: 114
Default IO-540-D4A5

Thanks everyone for the help with the CAM.

One more dilemma, I have cleaned off my cylinder hold down plates P/N: 69531 by walnut blasting them. Worked great, removed all of the old paint, but not the black coating which appears to be perhaps a black oxide. Unfortunately there are two of the plates that appear to have some surface corrosion that I would like to bead blast off, but I am certain that would take off the corrosion protection. I am wondering if anyone knows how these are coated. I have heard that these could be zinc plated, but this would require heat treatment and could cause embriddlement. Does anyone know of another option? Or should I just buy some new ones, my guess is they are expensive.

Thanks,

Bryan
Reply With Quote
  #8  
Old 10-25-2018, 09:11 AM
659JR 659JR is offline
 
Join Date: Dec 2011
Location: delta, co
Posts: 204
Default hold down plates

There is a lycoming SI I believe SI1228A to grind the corners of the plates to make sure they seat properly. If you have to grind them they will need plated. I use a company in Oregon but if you have a prop shop in your area I know a lot of them do their own plating.

Jesse
970-874-7575
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:25 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.