seat belts for RV-10

[jor.ezq]

Hi, Can anyone post a pic of the cabin top attachment ?
I?m just to do it with Crow belts.

thanks
Rv-10 in Buenos Aires

Originally Posted by Carl Froehlich

Cabin top hardpoint for the rear seatbelts would be at a bad angle - so probably not a good idea.

For the front seat shoulder belts I added serveral bids of glass (carbon) on the inside of the cabin top as the top thickness seemed inadequate to me - especially after counter sinking for the attachement bolt. For the attachement bolt I flatten two sides to keep it from not rotating and I set it in flox, the head just below the top of the cabin. I later fill in with micro over the head, sanded, then a coulple bids of fiberglass. More micro and more sanding - done.

I use Hooker Harness for my belts - but the brand makes no difference.

Carl