|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

08-07-2018, 01:08 PM
|
|
|
|
Join Date: Feb 2005
Location: San Antonio, TX
Posts: 51
|
|
Danny, Looks like it kicked out again. -Vic
|

08-07-2018, 03:35 PM
|
 |
|
|
Join Date: Feb 2005
Location: Bay Pines, FL (based @ KCLW)
Posts: 1,955
|
|
Quote:
Originally Posted by Vic LaRocca
Danny, Looks like it kicked out again. -Vic
|
This time, I sent it to you as a zip file, but through my own smtp server vs gmail.
Sent to me also, I received the file in my non-gmail acount & was able to unzip.
My gmail account blocked it inbound & outbound
__________________
Danny "RoadRunner" Landry
Morphed RV7(formally 7A), N20DL, PnP Pilot
1190+ hours
2019 Donation Paid
|

08-07-2018, 04:36 PM
|
|
|
|
Join Date: Feb 2005
Location: San Antonio, TX
Posts: 51
|
|
Got it and it unzipped ok. Will let you know how it goes tomorrow PM. Thanks, Vic
|

08-08-2018, 04:39 PM
|
|
|
|
Join Date: Feb 2005
Location: San Antonio, TX
Posts: 51
|
|
Worked fine. Thanks Danny. -Vic
|

08-10-2018, 07:59 PM
|
|
|
|
Join Date: Nov 2017
Location: Hudson
Posts: 5
|
|
NavWorx EFB Tablet
I have completed initial testing and have found that the Android based EFB iFlyGPS and AVARE both work with my ADS600B. Both programs need the WiFi since they do not work with Bluetooth. iFlyGPS program loads onto and receives signal from the NavWorx directly. The I/O Plug-in of the AVARE is needed to transmit nmea data from the NavWorx to the Tablet and must be using code 4000. Both EFBs need to have NavWorx Transmit baud rate 115,200 set on Traffic Alerts.
|

08-10-2018, 08:36 PM
|
 |
|
|
Join Date: Feb 2005
Location: Bay Pines, FL (based @ KCLW)
Posts: 1,955
|
|
Quote:
Originally Posted by Vic LaRocca
Worked fine. Thanks Danny. -Vic
|
That's great
I'm happy to hear it worked for you.
__________________
Danny "RoadRunner" Landry
Morphed RV7(formally 7A), N20DL, PnP Pilot
1190+ hours
2019 Donation Paid
|

12-29-2018, 07:22 AM
|
|
|
|
Join Date: Aug 2011
Location: SE Michigan
Posts: 161
|
|
Navworx installs
I see this is old....
I've been installing these units helping those stuck with them by as a low cost ADSB install. Looks like on the latest install, I'm having trouble like described here...for me, a baro failure. The detailed report shows intermittent. Like you, I have replaced almost everything. 3 encoders (not trusting the second one), a transponder and today I plan to try a diff Navworx units. All checks come up good on the programming. Any more help would be appreciated.
|

12-29-2018, 08:25 AM
|
 |
|
|
Join Date: Jun 2006
Location: Delaware, OH (KDLZ)
Posts: 4,196
|
|
Quote:
Originally Posted by dvalle
I see this is old....
I've been installing these units helping those stuck with them by as a low cost ADSB install. Looks like on the latest install, I'm having trouble like described here...for me, a baro failure. The detailed report shows intermittent. Like you, I have replaced almost everything. 3 encoders (not trusting the second one), a transponder and today I plan to try a diff Navworx units. All checks come up good on the programming. Any more help would be appreciated.
|
I would check the obvious, a loose wiring connection or chafing wire. Put an ohm meter to test continuity and wiggle the wire at various places along the route.
Is this a 600 or EXP?
|

01-02-2019, 02:13 PM
|
|
|
|
Join Date: Aug 2011
Location: SE Michigan
Posts: 161
|
|
Navworx installs
As mentioned earlier, I've been working with others stuck with these units (including myself) because of the AD by selling and installing (per AMOC) at a significant savings over all other ADS-B units. So far good luck except one plane...an RV6A. The plane keeps giving Baro Alt failures. I am pulling my hair out trying everything and still no luck. Changed encoder, transponder, transmon, Navworx unit, checked wiring...no luck. Sure learned a lot in the mean time on how this unit and ASD-B work. Any ideas??
|

01-03-2019, 05:51 AM
|
 |
|
|
Join Date: Jun 2006
Location: Delaware, OH (KDLZ)
Posts: 4,196
|
|
Quote:
Originally Posted by dvalle
As mentioned earlier, I've been working with others stuck with these units (including myself) because of the AD by selling and installing (per AMOC) at a significant savings over all other ADS-B units. So far good luck except one plane...an RV6A. The plane keeps giving Baro Alt failures. I am pulling my hair out trying everything and still no luck. Changed encoder, transponder, transmon, Navworx unit, checked wiring...no luck. Sure learned a lot in the mean time on how this unit and ASD-B work. Any ideas??
|
Easy to debug, since just about all inputs to the 600 are ascii text strings. Just use hyperterminal or putty to watch what data is being transmitted on the encoder line. If you see data, the problem is the Navworx box or configuration.
No data, then the problem is the encoder or an open circuit.
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 03:46 AM.
|