5.2.8.6 DEMO MODE SELECT*
The DEMO MODE SELECT* discrete input is used to select Demo Mode on the GTN.
When this pin is connected to ground during power up, the GTN starts up in Demo Mode. Demo Mode allows the GTN to simulate reception of GPS satellite signals.
(this is only wired on bench setups)
Demo Mode can also be accessed by holding down the D key during power-up.
__________________
Walt Aronow, DFW, TX (52F)
EXP Aircraft Services LLC
Specializing in RV Condition Inspections, Maintenance, Avionics Upgrades
Dynamic Prop Balancing, Pitot-Static Altmeter/Transponder Certification
FAA Certified Repair Station, AP/IA/FCC GROL, EAA Technical Counselor
Authorized Garmin G3X Dealer/Installer
RV7A built 2004, 1700+ hrs, New Titan IO-370, Bendix Mags
Website: ExpAircraft.com, Email: walt@expaircraft.com, Cell: 972-746-5154
|