VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 03-06-2018, 05:24 AM
BruceMe's Avatar
BruceMe BruceMe is offline
 
Join Date: Feb 2005
Location: Shawnee, Kansas
Posts: 804
Default CS Conversion hardware

I'm converting my O-320-C2B to constant speed and I need the special front fitting and oil line. Where can I source these?

Thanks,
__________________
Bruce Meacham

Building RV-4A 18ZM
Built/Own RV-4 254MM
First RV RV-3 3456B

VAF annual donation on autopay
Reply With Quote
  #2  
Old 03-06-2018, 06:24 AM
Scremm's Avatar
Scremm Scremm is offline
 
Join Date: Feb 2006
Location: Eliot, Maine
Posts: 83
Default

http://www.airpowerinc.com Search for 75167, I believe this is the oil line you are looking for. They probably have the steel front fitting as well.
__________________
Claudio Scremin
N221Z RV8A Maine 600+ hrs
Reply With Quote
  #3  
Old 03-06-2018, 06:40 AM
mike newall's Avatar
mike newall mike newall is offline
 
Join Date: Jan 2005
Location: Yorkshire, England
Posts: 2,052
Default

And take a deep breath before you open the page
__________________
"I add a little excitement, a little spice to your lives, and all you do is complain!" - Q

Donated in 2020
Reply With Quote
  #4  
Old 03-06-2018, 09:52 AM
BruceMe's Avatar
BruceMe BruceMe is offline
 
Join Date: Feb 2005
Location: Shawnee, Kansas
Posts: 804
Default

It's just a stainless tube right? so I can fabricate one in aluminum, send it to a tubing shop to get stainless and get one for like... $20 right?

Thanks,
__________________
Bruce Meacham

Building RV-4A 18ZM
Built/Own RV-4 254MM
First RV RV-3 3456B

VAF annual donation on autopay
Reply With Quote
  #5  
Old 03-06-2018, 10:03 AM
Mike S's Avatar
Mike S Mike S is offline
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,420
Default

Try talking to Tom at TS Flightlines?

Support a site advertiser.......
__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
  #6  
Old 03-06-2018, 10:10 AM
pazmanyflyer's Avatar
pazmanyflyer pazmanyflyer is offline
 
Join Date: Jul 2007
Location: Litchfield Park, AZ
Posts: 1,019
Default

Quote:
Originally Posted by BruceMe View Post
I'm converting my O-320-C2B to constant speed and I need the special front fitting and oil line. Where can I source these?

Thanks,
Dowload Lycomings Service Instruction No. 1435 pdf publication from here https://www.lycoming.com/content/ser...uction-no-1435 It will give you the part numbers and alt hose info your looking for. For sourcing the best prices have been in favor to Air Power previously linked. There may be someone that switched out so look in the standard classified locations.
__________________
Carlos in Arizona
EAA Chapter 538 www.chapters.eaa.org/eaa538
Wittman Tailwind W8 N53CH (built & sold)
Pazmany PL-1 N2029 (bought & sold)
RV7 - N537TC (reserved & building)
Emp, Wings & Fuse done - working on FWF

"The air is an extremely dangerous, jealous and exacting mistress. Once under the spell most lovers are faithful to the end, which is not always old age." - Winston Churchill

Last edited by pazmanyflyer : 03-06-2018 at 10:15 AM.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:15 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.