VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!
- Today's Posts | Insert Pics

  #31  
Old 02-08-2018, 08:13 AM
flynwest flynwest is offline
 
Join Date: May 2008
Location: Sacramento
Posts: 377
Default Angle Valve Covers
OK Ross
When do the Angle Valve covers start production?
__________________
Horse Power is good, more is better and
Too Much is Just Right
RV 8 Super charged Barrett IO-390
Dues paid 2020
Dan "Nordo" West
Reply With Quote
  #32  
Old 02-08-2018, 08:53 AM
wirejock's Avatar
wirejock wirejock is offline
 
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 3,931
Default I'm in.
I'm in for the next production run.
Set of four for Lycoming IO360M1B
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 12/03/2019, plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote
  #33  
Old 02-08-2018, 12:45 PM
rv6ejguy's Avatar
rv6ejguy rv6ejguy is offline
 
Join Date: Mar 2005
Location: Calgary, Canada
Posts: 5,744
Default
Quote:
Originally Posted by flynwest View Post
OK Ross
When do the Angle Valve covers start production?
They are going into CAD next week but after measuring a bunch of heads for material around the bolts and casting variations, we were not confident we could make them seal reliably with an O-ring. There just isn't the same room as on the PV heads. So we will still use flat gaskets on these but we're looking at our own solution to this area. I can't talk about that part until we test prototypes though.
__________________

Ross Farnham, Calgary, Alberta
Turbo Subaru EJ22, SDS EFI, Marcotte M-300, IVO, Shorai- RV6A C-GVZX flying from CYBW since 2003- 441.0 hrs. on the Hobbs,
RV10 95% built- Sold 2016
http://www.sdsefi.com/aircraft.html
http://sdsefi.com/cpi2.htm
Reply With Quote
  #34  
Old 02-08-2018, 12:46 PM
rv6ejguy's Avatar
rv6ejguy rv6ejguy is offline
 
Join Date: Mar 2005
Location: Calgary, Canada
Posts: 5,744
Default
Quote:
Originally Posted by wirejock View Post
I'm in for the next production run.
Set of four for Lycoming IO360M1B
Thanks Larry. I'll PM you.
__________________

Ross Farnham, Calgary, Alberta
Turbo Subaru EJ22, SDS EFI, Marcotte M-300, IVO, Shorai- RV6A C-GVZX flying from CYBW since 2003- 441.0 hrs. on the Hobbs,
RV10 95% built- Sold 2016
http://www.sdsefi.com/aircraft.html
http://sdsefi.com/cpi2.htm
Reply With Quote
  #35  
Old 02-23-2018, 05:13 PM
rv6ejguy's Avatar
rv6ejguy rv6ejguy is offline
 
Join Date: Mar 2005
Location: Calgary, Canada
Posts: 5,744
Default
Ok gents. I picked up all the VCs from the first anodizing and etching batch this afternoon. I'll be sending them out tomorrow.
__________________

Ross Farnham, Calgary, Alberta
Turbo Subaru EJ22, SDS EFI, Marcotte M-300, IVO, Shorai- RV6A C-GVZX flying from CYBW since 2003- 441.0 hrs. on the Hobbs,
RV10 95% built- Sold 2016
http://www.sdsefi.com/aircraft.html
http://sdsefi.com/cpi2.htm
Reply With Quote
  #36  
Old 03-01-2018, 03:50 PM
rv6ejguy's Avatar
rv6ejguy rv6ejguy is offline
 
Join Date: Mar 2005
Location: Calgary, Canada
Posts: 5,744
Default Run 3 Complete
Howard was busy this week and the next batch of SDS valve covers is in my hands now. Anyone who missed the last batch can get on board with this one.

They will be going to anodizing and etching late next week. It's more economical if we can anodize and etch all at the same time.

About 1/3rd of this batch are already spoken for so if you want some, contact us in the next few days.
__________________

Ross Farnham, Calgary, Alberta
Turbo Subaru EJ22, SDS EFI, Marcotte M-300, IVO, Shorai- RV6A C-GVZX flying from CYBW since 2003- 441.0 hrs. on the Hobbs,
RV10 95% built- Sold 2016
http://www.sdsefi.com/aircraft.html
http://sdsefi.com/cpi2.htm
Last edited by rv6ejguy : 03-05-2018 at 07:27 PM.
Reply With Quote
  #37  
Old 03-06-2018, 09:58 AM
TShort TShort is offline
 
Join Date: Jan 2005
Location: Indianapolis, IN (KUMP)
Posts: 1,019
Default
I got mine yesterday - they look fantastic! Can't wait to get them installed.

Dog approved...

__________________
Thomas Short
KUMP - Indianapolis, IN / KAEJ - Buena Vista, CO
RV-10 N410TS bought / flying
RV-8 wings / fuse in progress ... still
1948 Cessna 170 N3949V
Reply With Quote
  #38  
Old 03-06-2018, 10:25 AM
rv6ejguy's Avatar
rv6ejguy rv6ejguy is offline
 
Join Date: Mar 2005
Location: Calgary, Canada
Posts: 5,744
Default
Glad you like them Thomas.

I'll be heading down to the anodizer on Friday to do part of the next batch so anyone contemplating a set, get your order and logo files in over the next couple days please.
__________________

Ross Farnham, Calgary, Alberta
Turbo Subaru EJ22, SDS EFI, Marcotte M-300, IVO, Shorai- RV6A C-GVZX flying from CYBW since 2003- 441.0 hrs. on the Hobbs,
RV10 95% built- Sold 2016
http://www.sdsefi.com/aircraft.html
http://sdsefi.com/cpi2.htm
Reply With Quote
  #39  
Old 03-06-2018, 11:48 AM
Lenny Iszak's Avatar
Lenny Iszak Lenny Iszak is offline
 
Join Date: Sep 2008
Location: Palm City, FL
Posts: 315
Default
Got mine too, beautiful work Ross! Thank you!

Lenny
__________________
Lenny Iszak
Palm City, FL
2014 RV-10, N311LZ - 650 hrs
OnSpeed development team
Reply With Quote
  #40  
Old 03-06-2018, 12:09 PM
rv6ejguy's Avatar
rv6ejguy rv6ejguy is offline
 
Join Date: Mar 2005
Location: Calgary, Canada
Posts: 5,744
Default
Good! We sent out 6 boxes on Feb. 26 and it looks like they all arrived on about the same day even though they were all to different states.

BTW the aluminum billet stock for the last 2 runs came from Seattle. The price and service was better than from Montreal and we like to support our mainly American customer base/ economy by buying from the US whenever we can. We really appreciate our American customer support and never buy billet from offshore- even if it's a lot cheaper.

We go through thousands of pounds of aluminum billet per year, about 3/4 of that from US sources.
__________________

Ross Farnham, Calgary, Alberta
Turbo Subaru EJ22, SDS EFI, Marcotte M-300, IVO, Shorai- RV6A C-GVZX flying from CYBW since 2003- 441.0 hrs. on the Hobbs,
RV10 95% built- Sold 2016
http://www.sdsefi.com/aircraft.html
http://sdsefi.com/cpi2.htm
Reply With Quote
Reply
Page 4 of 9 « First < 23 4 56 > Last »

« Previous Thread | Next Thread »

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:41 AM.
Contact Us - VAFForums Home - Archive - Privacy Statement - Top

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.