VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1041  
Old 03-14-2017, 11:55 AM
Md11av8r Md11av8r is offline
 
Join Date: Jan 2016
Location: Jacksonville, Fl
Posts: 46
Default

Almost ready!!


__________________
N747RJ RV-10 IO-540-X SDS EM-5F, Dual Dynon HDX 10, IFD440, Sl-30, Dynon A/P, with Knob Panel
Reply With Quote
  #1042  
Old 08-23-2017, 12:01 PM
KatanaPilot KatanaPilot is offline
 
Join Date: Feb 2015
Location: Locust Grove, GA
Posts: 754
Default New panel from Stein

Here is our RV-7A panel on the bench at Stein this morning. Can't say enough good about the support and expertise from Stein and his team.

Only known change will be to lever-lock switches for the ignition.

https://www.dropbox.com/s/96v59k8j3i...panel.jpg?dl=0
__________________
Krea Ellis

Locust Grove, GA
DA20-A1 "Princess Amelia" - gone home to Amelia Island
RV-7A Phase 2 (Honored to be Van's "Miss July" 2021)
RV-10 under construction at Synergy Air South
Reply With Quote
  #1043  
Old 09-22-2017, 05:08 PM
Rbb469's Avatar
Rbb469 Rbb469 is offline
 
Join Date: Jul 2014
Location: 2M8
Posts: 45
Default

Quote:
Originally Posted by KatanaPilot View Post
Here is our RV-7A panel on the bench at Stein this morning. Can't say enough good about the support and expertise from Stein and his team.

Only known change will be to lever-lock switches for the ignition.

https://www.dropbox.com/s/96v59k8j3i...panel.jpg?dl=0
Very nice panel!!!!
__________________
Dues gladly paid!
Reply With Quote
  #1044  
Old 10-08-2017, 05:40 PM
sahrens's Avatar
sahrens sahrens is offline
 
Join Date: Jan 2007
Location: Battle Ground
Posts: 534
Default My panel completed

I tried to keep it clean and simple.







Working with Bill at UpNorth Aviation I completed the design work and he cut the panel. The labels were done by Matt at Aircraft Engravers. Stein built the wiring harness for the radios including the headset jacks. All three were wonderful to work with and made the panel process very easy.
__________________
Scott
RV-7 N818BG (flying)
Bearhawk Patrol (building)
RV-7 (resurrecting)

Last edited by sahrens : 10-08-2017 at 05:45 PM. Reason: Clarity
Reply With Quote
  #1045  
Old 10-23-2017, 09:41 PM
bret's Avatar
bret bret is offline
 
Join Date: Feb 2010
Location: Gardnerville Nv.
Posts: 2,828
Default Dynon stuff

__________________
7A Slider, EFII Angle 360, CS, SJ.
Reply With Quote
  #1046  
Old 10-24-2017, 06:13 AM
Simon Hitchen's Avatar
Simon Hitchen Simon Hitchen is offline
 
Join Date: Apr 2006
Posts: 306
Default Ace

That does look very sharp Bret.. nicely done!

One of the best I've seen
__________________
Simon Hitchen
Port Perry, ON, Canada
7 Tip Up, Titan XIO-360, Dual P-Mags, Airflow Performance matched Injectors, Sensenich FP Prop, 2 Dynon Skyviews, GPS-175, GTR-200, GTX-327. Day/night VFR/ IFR
Reply With Quote
  #1047  
Old 10-24-2017, 10:26 AM
bret's Avatar
bret bret is offline
 
Join Date: Feb 2010
Location: Gardnerville Nv.
Posts: 2,828
Default

Quote:
Originally Posted by Simon Hitchen View Post
That does look very sharp Bret.. nicely done!

One of the best I've seen
Thanks, just acquired the second panel from a nice gentleman here on the forums, little did I know....that when I plugged in the second panel, there was some kind of conflict, I lost everything as far as set up, it took several hours to redo all my fuel tables and re set everything, should have saved my settings before adding the second screen, live and learn, but its all good now.
__________________
7A Slider, EFII Angle 360, CS, SJ.
Reply With Quote
  #1048  
Old 10-24-2017, 12:38 PM
Raymo's Avatar
Raymo Raymo is offline
 
Join Date: Nov 2014
Location: Richmond Hill, GA (KLHW)
Posts: 2,340
Default

Bret,

This thread on the Dynon site would have saved you the headache.

http://dynonavionics.com/cgi-bin/yab...1508099236/1#1

"New displays are basically primed (using that special DYNON tail number) to adopt/copy in all of the settings when you do a network configuration from an existing display."

Beautiful panel, BTW!
__________________
Ray
RV-7A - Slider - N495KL - First flt 27 Jan 17
O-360-A4M w/ AFP FM-150 FI, Dual PMags, Vetterman Trombone Exh, SkyTech starter, BandC Alt (PP failed after 226 hrs)
Catto 3 blade NLE, FlightLines Interior, James cowl, plenum & intake, Anti-Splat -14 seat mod and nose gear support
All lines by TSFlightLines (aka Hoser)
Reply With Quote
  #1049  
Old 10-24-2017, 02:15 PM
bret's Avatar
bret bret is offline
 
Join Date: Feb 2010
Location: Gardnerville Nv.
Posts: 2,828
Default

Thanks for that info, but Just to save someone from making my mistake, I bought this kinda used, it was in very new condition but had the previous owners tail number set and I did not notice this until it booted up, then red Xs started popping up everywhere.....NOOOO, in any case, it was a good exercise on how to configure a complete Dynon system.....again, luckily I had all the fuel tank sensors cal numbers and EMS pinout notes
__________________
7A Slider, EFII Angle 360, CS, SJ.
Reply With Quote
  #1050  
Old 10-24-2017, 09:14 PM
fabricflyer fabricflyer is offline
 
Join Date: May 2011
Location: Tylertown, MS
Posts: 192
Default

Bret, Nice panel. Do you suppose you could take a head on picture of your panel (from the pilots prospective)?
Allen
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 03:26 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.