|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

05-17-2017, 08:12 AM
|
|
|
|
Join Date: Jan 2005
Location: Ontario, Canada
Posts: 1,544
|
|
RV14 canopy lock
Has anyone installed a canopy lock for the RV14 yet? If so, I would really appreciate a picture or two.
Also, for those flying; How do you secure the canopy in an open "taxi" position. It would be possible to open the canopy lift it two or three inches and then close the latch and rest the open canopy on the latch mechanism. This would work but provides no method of holding the canopy in that position. My concern would be a strong tail wind from aft possibly throwing open the unsecured canopy.
There does not appear to be enough room to drill another lower, canopy open hole, in the canopy bow.
Thanks
Tom Martin
__________________
Tom Martin RV1 pilot 4.6hours!
CPL & IFR rated
EVO F1 Rocket 1000 hours,
2010 SARL Rocket 100 race, average speed of 238.6 knots/274.6mph
RV4, RV7, RV10, two HRIIs and five F1 Rockets
RV14 Tail dragger
Fairlea Field
St.Thomas, Ontario Canada, CYQS
fairleafield@gmail.com
Last edited by Tom Martin : 05-17-2017 at 08:23 AM.
|

05-17-2017, 09:02 AM
|
 |
|
|
Join Date: Mar 2014
Location: Granbury, TX
Posts: 268
|
|
I have not installed a canopy lock. However, using an idea from an RV-7 builder, I plan to drill one hole each (~#30) in the external lugs on the latch and release, and then use a small pad lock between them. While hardly strong, it deters curious hands. If someone really wants to steal the avionics, I "hope" that cutting the small padlock is easier than breaking the canopy.
Regarding the open/vent position, the canopy is pretty solidly seated on the pins. The struts have very little leverage in the down position so the weight of the canopy holds it in place. I think the wind risk is slight. YMMV
__________________
Keith Brown
RV-14A Builder - kit #136
N314KC - First flight Mar 8, 2017, 24th in the air, >600 hrs
XP-400 Aero Sport Power, replaced with Lyc Thunderbolt 390
RV-6A sold
Sport Pilot (weight-shift control) - Airborne XT912
Dues paid 9/2020
|

05-17-2017, 11:27 AM
|
|
|
|
Join Date: Feb 2016
Location: Boynton Beach, Florida
Posts: 62
|
|
I'm working a locking latch cover design to prevent the 'squeezing' of the latch dogs to release the latch itself.
I agree with Keith comment concerning the unsecure canopy threat issue.
On the subject, one must make it a habit to always return the latch to lock position ; canopy open, rest open, or close position to avoid catching a leg on the outside latching mechanism.
__________________
Hank
N14HN Phase 1
140268
B744
Sailplane Racing
Dues
|

05-17-2017, 11:39 AM
|
|
|
|
Join Date: Jan 2005
Location: Ontario, Canada
Posts: 1,544
|
|
Thanks guys, great suggestions. I was asking a friend about the lock this morning and he suggested the external lock with the hole in the latch idea as well. So simple, light and easy, I like it!
__________________
Tom Martin RV1 pilot 4.6hours!
CPL & IFR rated
EVO F1 Rocket 1000 hours,
2010 SARL Rocket 100 race, average speed of 238.6 knots/274.6mph
RV4, RV7, RV10, two HRIIs and five F1 Rockets
RV14 Tail dragger
Fairlea Field
St.Thomas, Ontario Canada, CYQS
fairleafield@gmail.com
|

05-17-2017, 03:05 PM
|
 |
|
|
Join Date: Jul 2005
Location: Hubbard Oregon
Posts: 9,035
|
|
Quote:
Originally Posted by Tom Martin
It would be possible to open the canopy lift it two or three inches and then close the latch and rest the open canopy on the latch mechanism. This would work but provides no method of holding the canopy in that position. My concern would be a strong tail wind from aft possibly throwing open the unsecured canopy.
There does not appear to be enough room to drill another lower, canopy open hole, in the canopy bow.
|
This is the design intent and is how both factory demonstrators have been operated for hundreds of hours. In the vent position, the struts are still in an over center position so they are slightly pushing in the closed direction. I wont say that it is impossible for it to be blow open but RV-6's, 7's, and 9's have been operated this way for decades without any problem that I am aware of.
Quote:
Originally Posted by KeithB
I have not installed a canopy lock. However, using an idea from an RV-7 builder, I plan to drill one hole each (~#30) in the external lugs on the latch and release, and then use a small pad lock between them. While hardly strong, it deters curious hands. If someone really wants to steal the avionics, I "hope" that cutting the small padlock is easier than breaking the canopy.
|
This has been the design intent of the latch since it was first used on the RV-6 (though I admit not documented very well) but the holes are left out for the builder to add only if they want it.
__________________
Opinions, information and comments are my own unless stated otherwise. They do not necessarily represent the direction/opinions of my employer.
Scott McDaniels
Van's Aircraft Engineering Prototype Shop Manager
Hubbard, Oregon
RV-6A (aka "Junkyard Special ")
|

05-18-2017, 06:50 AM
|
 |
|
|
Join Date: May 2005
Location: Florida
Posts: 774
|
|
It is perfectly acceptable to taxi with the canopy resting on the protruding locking pins but I strongly advise: A- making sure your arm is resting on the canopy edge to ensure it is held down. B- Make sure you install the audible warning alert for the canopy into your software. The canopy WILL lift up at fast taxi or takeoff roll speeds. Ask how I know.
Cheers
|

05-18-2017, 08:25 AM
|
 |
|
|
Join Date: Jul 2005
Location: Hubbard Oregon
Posts: 9,035
|
|
Quote:
Originally Posted by woodmanrog
It is perfectly acceptable to taxi with the canopy resting on the protruding locking pins but I strongly advise: A- making sure your arm is resting on the canopy edge to ensure it is held down. B- Make sure you install the audible warning alert for the canopy into your software. The canopy WILL lift up at fast taxi or takeoff roll speeds. Ask how I know.
Cheers
|
I think that will also happen even if it is fully closed but not latched (as proven repeatedly by a lot of different RV pilots  )
__________________
Opinions, information and comments are my own unless stated otherwise. They do not necessarily represent the direction/opinions of my employer.
Scott McDaniels
Van's Aircraft Engineering Prototype Shop Manager
Hubbard, Oregon
RV-6A (aka "Junkyard Special ")
|

05-18-2017, 01:24 PM
|
|
|
|
Join Date: Apr 2015
Location: Ponte Vedra, FL
Posts: 1,474
|
|
Quote:
Originally Posted by woodmanrog
It is perfectly acceptable to taxi with the canopy resting on the protruding locking pins but I strongly advise: A- making sure your arm is resting on the canopy edge to ensure it is held down. B- Make sure you install the audible warning alert for the canopy into your software. The canopy WILL lift up at fast taxi or takeoff roll speeds. Ask how I know.
Cheers
|
Sounds like the Bernoulli principle in action
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 11:51 PM.
|