Yep, it was cut off too short, maybe related to wiring above it. Recommend consulting Vans about this. It would be relatively easy to drill the rivets out and replace with a proper one. Look closely at the wiring above it first.
__________________
Bill
RV-7
Lord Kelvin:
“I often say that when you can measure what you are speaking about,
and express it in numbers, you know something about it; but when you
cannot measure it, when you cannot express it in numbers, your knowledge
is of a meager and unsatisfactory kind.”
|
Does this gap look ok to you?
CJ
Linear Mode
