VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-10
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-21-2017, 02:58 PM
togaflyer togaflyer is offline
 
Join Date: Apr 2013
Location: Southeast
Posts: 663
Default Garmin AP roll servo and aileron trim

Im currently running wires (oh so nice to be past the doors and cabin) and have a question about the aileron trim and servo. Standard install requires the GSA 28 servo on the right wing with the Ray Allen aileron trim on the left wing. This also will require two wires for power running from the trim to the AP servo. Has anyone installed both in the right wing with good results. I did read a post were both were installed in the left wing, but it required the fabrication of new servo brackets. I prefer staying with the right wing install.
Reply With Quote
  #2  
Old 02-21-2017, 04:44 PM
JDanno JDanno is offline
 
Join Date: Apr 2008
Location: Tennessee
Posts: 440
Default

Yes, both in right wing. Works fine!
Reply With Quote
  #3  
Old 02-21-2017, 07:52 PM
togaflyer togaflyer is offline
 
Join Date: Apr 2013
Location: Southeast
Posts: 663
Default

Dan, did you install both in the right wing. If so, what is different when installing the Ray Allen trim on the right side with the AP servo.
Reply With Quote
  #4  
Old 02-23-2017, 12:04 AM
bob888 bob888 is offline
 
Join Date: Jul 2012
Location: Fresno, CA
Posts: 270
Default

Mine are both on the right, no problem! Mounted the Ray Allen on the inboard inspection panel.
Reply With Quote
  #5  
Old 02-27-2017, 01:35 PM
togaflyer togaflyer is offline
 
Join Date: Apr 2013
Location: Southeast
Posts: 663
Default

Great, thanks.....
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:53 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.