Thanks Mickey,
It was an evolutionary process, (addition of the autopilot couple years ago then recently adding wig wag capability to my new LED landing lights)... I do like the end result.
Make a sheet up using Visio or similar (think model decal sheet). Nest little things in big things, etc. to get max use out of the space. Make extras in case you mess up.
Cut out and rub down. Lightly coat with matte clear to seal, or just leave if not subject to wear.
Note, the sheets do have a shelf life. My six year old leftovers are dried out and won't stick down.
Good luck!
+1 to this. The dry transfer labels are the way to go if you want that factory look without going full silkscreen.
__________________
Colin P.
RV-6A #20603
Complete 5/10/19
PP SEL / A&P
I donate every year on my B-Day (in Dec), but donated early in Sep'19.
I ordered the letters/words from aerographics.com, out of Loveland, CO. Very reasonable prices and very quick replies. I have letters/words adhered to the exterior of my plane and have had no de-lamination issues after years of flying!