Quote:
Originally Posted by g zero
Installing a GSA 28 roll and pitch servos in my 8 . Looking thru the forums there is some vague info on what hole in the servo lever to install the heim joint . All the Garmin Pics show it in the outer hole . Where in the Garmin install info does it mention what hole to use ?
|
Hello g_zero,
The RV-8 pitch servo drawing on page 15-29 of the Rev. AA installation manual has a note that says to use the outer hole for the pitch servo arm.
The RV-8 roll servo drawing on page 15-30 has a note that says to use the middle hole for the roll servo arm.
Let us know if you have additional questions.
Thanks,
Steve