Fuel sender wire

[clutch22]

My wings are stored elsewhere. I'm routing all my wires. Is there a tooling hole or something in the spar that I can run my fuel sender wire through to get to my passthru hole in my fuselage, or do I need to add another small passthru hole in the fuse skin forward of the spar?

[Auburntsts]

There's no tooling holes in that area --just the holes for the aileron pushrods and the fuel lines. I drilled a small hole for 1/8' snap bushing more or less directly across from the senders and called it good.

[clutch22]

Thanks Todd,

Originally Posted by Auburntsts

There's no tooling holes in that area --just the holes for the aileron pushrods and the fuel lines.

I was referring to the possibility of a hole in the wing spar near the root.

Originally Posted by Auburntsts

I drilled a small hole for 1/8' snap bushing more or less directly across from the senders and called it good.

This is what I was hoping others were doing.
Thank you!