G3X Touch Software Update - v5.00

[g3xpert]

On Tuesday we released a major software update for the G3X Touch system. As usual, software updates are free to download from our website. To get all the details and download the latest, follow this link.

One major new feature is the addition of airspace altitude labels on our dynamic moving map. This has been a big customer request and we are excited to deliver. In the example below, you'll see the altitude ceiling labeled on the Class D airspace as well as the restricted airspace floor and ceiling.



The next major feature is related to new engine monitoring support. I recognize this is not necessarily applicable to our RVs, but you never know what other projects are lurking out there in the RV world!

• Multi-engine monitoring using two GEA 24 LRUs (Only requires 1 GDU 46X or 45X display)
• Single engine with 7-12 cylinders support using two GEA 24 LRUs
• Support for additional discrete inputs on a second GEA 24 if installed

So if you happen to have dreams of building an AirCam someday, or maybe need engine monitoring support for something unusual like a V8 engine or 9 cylinder radial, we've got you covered! Here are some examples of the new engine monitoring layouts.

9 Cylinder Engine



Twin Engine







Thanks,
Brian

[rockwoodrv9]

I just fired up my system last week and was able to sit in my plane and have some fun trying things out. I will update today for more fun!

What would be great would be a class or seminar on how to use the system.

[DoubleA]

Any possibility that the non touch G3X will be getting airspace altitudes added?

[newtech]

Originally Posted by DoubleA

Any possibility that the non touch G3X will be getting airspace altitudes added?

Plus 1, have wished for this from the beginning.

[SmilingJack]

Originally Posted by newtech

Plus 1, have wished for this from the beginning.

+2

Also, any status on new version of GDL39 software? Seems the bluetooth is not stable and drops the connection from GDL39 to ipad.

Thanks!

[Pat Hatch]

John, it appears that the firmware update is in Garmin Pilot. I was flying last Sunday and was having intermittent GDL 39 connectivity when a notice popped up in Garmin Pilot that there was a firmware update available to upload. I debated on whether to wait until I got on the ground but decided to give it a try in flight. I was at altitude and on autopilot. It took about 3 minutes for the update to load and reboot and I immediately had a rock-solid connection to the GDL 39 on my iPad! Pretty cool and a first for me.

[SmilingJack]

Originally Posted by Pat Hatch

John, it appears that the firmware update is in Garmin Pilot. I was flying last Sunday and was having intermittent GDL 39 connectivity when a notice popped up in Garmin Pilot that there was a firmware update available to upload. I debated on whether to wait until I got on the ground but decided to give it a try in flight. I was at altitude and on autopilot. It took about 3 minutes for the update to load and reboot and I immediately had a rock-solid connection to the GDL 39 on my iPad! Pretty cool and a first for me.

Thanks Pat. I am using Foreflight, so maybe I have to wait until they update their program.

Hope things are going good on the east coast.

[PixelWorker]

Where can I find a list of the other updates, fixes, etc.?

[PixelWorker]

Found it:


Changes made from version 4.90 to 5.00:

Add display of airspace altitudes on map
Add support for multi-engine monitoring using two GEA 24 LRUs
Add support for single engines with 7-12 cylinders using two GEA 24 LRUs
Add support for additional discrete inputs on second GEA 24
Add ability to configure fuel economy units separately from fuel quantity
Add setup options to control appearance of airport and navaid facility names on map
Improve engine gauge number display for Bar and atmosphere units
Improve FADEC engine power and time display
Change to display ADS-B airport NOTAM data when SXM weather source is selected
General improvements to system operation
Includes update to G5 software version 2.50
Includes update to GDL39 software version 4.80
Includes GAD27 software version 2.20
Includes GAD29 software version 2.30
Includes GEA24 software version 2.90
Includes GI260 software version 2.70
Includes GMA245 audio software version 2.20
Includes GMA245 Bluetooth software version 2.00
Includes GMA245 software version 2.20
Includes GPS20A software version 2.20
Includes GSA28 software version 3.20
Includes GSU25 software version 3.60
Includes GSU73 software version 3.60
Includes GSU73 IGRF database version 1.03 (Base Year 2015)
Includes GTR20/200 software version 2.80

[g3xpert]

Originally Posted by PixelWorker

Where can I find a list of the other updates, fixes, etc.?

Hello Michael,

If you simply click the link to the G3X software update page and then click on the download link, you will see the complete software update change list.

Originally Posted by g3xpert

To get all the details and download the latest, follow this link.

- Matt