I too pondered this for a long time until the AH HA! Just a few tips:
You gotta fiddle with the jig and shim it a bit to get it right, be sure to lubricate with WD-40 when pulling through. The razor should clamped so that it exerts a little pressure on the bent Al below it.
Enjoy!
__________________
Cory Bull
Lakeway, TX
RV-10 , Interior done, Engine and avionics remain.
Planning on (3)10" Dynon HDX, Garmin GTN 650 and PS Engineering Audio.
2017 Dues Happily Paid
|