|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

10-12-2016, 01:40 PM
|
|
|
|
Join Date: Jun 2012
Location: Madison, AL
Posts: 67
|
|
Setting Skyview Altitude Bug
I have only a few hours using the SkyView. When I try to set the altitude bug,
I only get thousands of feet, i.e. 2000, 3000, 4000,..., as I turn the knob. How
do I set the altitude bug to 3,500?
|

10-12-2016, 03:09 PM
|
 |
|
|
Join Date: Jul 2007
Location: Keller, TX
Posts: 1,553
|
|
I don't have my installation or pilot's manuals for SkyView here but I think it is in the setup menu, perhaps in PFD setup. I have mine set up for 100' increments but did that a couple years ago so I don't exactly remember where I set that.
You might try asking the question on the Dynon forum website.
__________________
RV-8 180 hp IO-360 N247TD with 10" SkyView!
VAF Donations Made 8/2019 and 12/2019
"Cum omni alio deficiente, ludere mortuis."
(When all else fails, play dead.)
Last edited by Bubblehead : 10-13-2016 at 05:42 AM.
|

10-12-2016, 06:33 PM
|
|
|
|
Join Date: Dec 2008
Location: Edmonds, WA
Posts: 131
|
|
Each click of the knob should increase or decrease the bug by 100'. You cannot change it to 50' increments.
If you spin the knob quickly, then there is an "acceleration" which makes it advance more than 100' per click, but it doesn't sound like that is what you meant.
-Robert
Dynon
|

10-13-2016, 01:25 PM
|
|
|
|
Join Date: Jan 2005
Location: Granbury Texas
Posts: 1,136
|
|
Jim,
It should be in increments of 100.
__________________
Built, RV 8, RV8A, RV 10, RV12, Purchased RV7A
Restored J3Cub and PA28R180
Pecan Plantation
Eagles Nest Mentor
EAA Tech Counselor
|

10-13-2016, 01:33 PM
|
 |
|
|
Join Date: Nov 2014
Location: Richmond Hill, GA (KLHW)
Posts: 2,189
|
|
I saw this question on the Dynon forum but could find nothing in the manuals to allow changing the increments.
__________________
Ray
RV-7A - Slider - N495KL - First flt 27 Jan 17
O-360-A4M w/ AFP FM-150 FI, Dual PMags, Vetterman Trombone Exh, SkyTech starter, BandC Alt (PP failed after 226 hrs)
Catto 3 blade NLE, FlightLines Interior, James cowl, plenum & intake, Anti-Splat -14 seat mod and nose gear support
All lines by TSFlightLines (aka Hoser)
Last edited by Raymo : 10-13-2016 at 01:38 PM.
|

10-13-2016, 04:18 PM
|
|
|
|
Join Date: Jan 2005
Location: Granbury Texas
Posts: 1,136
|
|
Jim,
It had previously been on 100 increments however if somehow it has changed I would just call Dynon, they should be able to answer you question in a few minutes. They may even jump into this thread.
__________________
Built, RV 8, RV8A, RV 10, RV12, Purchased RV7A
Restored J3Cub and PA28R180
Pecan Plantation
Eagles Nest Mentor
EAA Tech Counselor
|

10-19-2016, 02:01 PM
|
|
|
|
Join Date: Jun 2012
Location: Madison, AL
Posts: 67
|
|
Thanks for your responses. Actually, I think I have to retract my question. Last weekend when I flew, everything behaved as I would expect it to. I guess I was spinning the knob too fast.
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 04:47 AM.
|