|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

09-17-2016, 06:36 AM
|
|
|
|
Join Date: Nov 2015
Location: Maricopa, AZ
Posts: 21
|
|
New Builder Joining the Ranks
Hello,
After lurking (as a paid member) on the forums here for about a year, I just upgraded myself to official builder. Just ordered my RV8 empennage kit from Vans yesterday. The kit should be shipping out on Tuesday they said... I assume it will arrive by next weekend. The shop (read: my garage) is all setup and in order and I'm currently working on the two practice kits. (I attended the EAA SportAir sheet metal workshop in Mesa, AZ last February). I am located in Maricopa, AZ - so if there are any builders nearby speak up!  (I am a member of my local EAA Chapter and will be attending my first meeting today, actually)
Any sage advice to get started would be welcomed!
__________________
__________________
Damien Currier
Maricopa, AZ
RV-8 Very Slow Build In Progress
Empennage kit 99% done and placed in long term storage
Wing kit building in progress
Saving for fuselage kit
N163RV (Reserved)
My Build Log
2020 Dues Paid
Last edited by dcurrier : 09-17-2016 at 06:41 AM.
|

09-17-2016, 06:46 AM
|
 |
|
|
Join Date: Jun 2005
Location: Cedar Park, TX
Posts: 3,156
|
|
Welcome. You're life is about to change. Plan accordingly.
__________________
Scott Card
CQ Headset by Card Machine Works
CMW E-Lift
RV-9A N4822C flying 2200+hrs. / Cedar Park, TX
RV8 Building - fuselage / showplanes canopy (Done!)
|

09-17-2016, 08:28 AM
|
 |
|
|
Join Date: Jan 2005
Location: Chandler, AZ
Posts: 2,904
|
|
Enjoy
I'm at Stellar, just up the road. Wrapping up my second RV7. You are welcome to stop by.
There is another local building an 8, that might chime in. Lots of resources in this area. A small slice of RV heaven.
__________________
Darwin N. Barrie
Chandler AZ
www.JDair.com
RV-7 N717EE-Flying (Sold)
RV-7 N717AZ Flying, in paint
EMS Bell 407,
Eurocopter 350 A-Star Driver
|

09-17-2016, 08:29 AM
|
 |
|
|
Join Date: Jan 2005
Location: Chandler, AZ
Posts: 2,904
|
|
Enjoy
I'm at Stellar, just up the road. Wrapping up my second RV7. You are welcome to stop by.
There is another local building an 8, that might chime in. Lots of resources in this area. A small slice of RV heaven.
__________________
Darwin N. Barrie
Chandler AZ
www.JDair.com
RV-7 N717EE-Flying (Sold)
RV-7 N717AZ Flying, in paint
EMS Bell 407,
Eurocopter 350 A-Star Driver
|

09-29-2016, 05:28 PM
|
|
|
|
Join Date: May 2015
Location: Crittenden, ky
Posts: 194
|
|
Good luck and always have fun!
I'm in the middle of an RV-8 slow build fuse and I do keep running out of clecos. Whatever Van's recommended number is - add maybe 100 3/32 and 50 1/8 clecos, more if you can find a good deal on them. I may be "over using" them, but I prefer to use lots when fitting the parts for match drilling. You have plenty of time to look for good deals - I did ok while working on the wings - since you only do one panel at a time.
Favorite tools: tungsten bucking bars - small ones are great, swivel head flush rivet set, dremel tool, good battery powered drill and extra battery, Scotch Brite wheels, .... can't have too many tools.
|

09-29-2016, 05:48 PM
|
|
|
|
Join Date: Sep 2007
Location: Central IL
Posts: 5,516
|
|
In my best Vorlon voice - "and so it begins"
Welcome to world of builders!
__________________
Bill
RV-7
Lord Kelvin:
“I often say that when you can measure what you are speaking about,
and express it in numbers, you know something about it; but when you
cannot measure it, when you cannot express it in numbers, your knowledge
is of a meager and unsatisfactory kind.”
|

09-29-2016, 09:54 PM
|
|
|
|
Join Date: Sep 2008
Location: Coolidge, AZ
Posts: 339
|
|
Quote:
Originally Posted by dcurrier
Hello,
After lurking (as a paid member) on the forums here for about a year, I just upgraded myself to official builder. Just ordered my RV8 empennage kit from Vans yesterday. The kit should be shipping out on Tuesday they said... I assume it will arrive by next weekend. The shop (read: my garage) is all setup and in order and I'm currently working on the two practice kits. (I attended the EAA SportAir sheet metal workshop in Mesa, AZ last February). I am located in Maricopa, AZ - so if there are any builders nearby speak up!  (I am a member of my local EAA Chapter and will be attending my first meeting today, actually)
Any sage advice to get started would be welcomed!
|
I'm not to far away in Coolidge working on an -8. You're welcome to stop by anytime also.
|

09-30-2016, 03:52 PM
|
|
|
|
Join Date: Nov 2012
Location: Chandler, Arizona
Posts: 14
|
|
Congratulations, I just saw this post or I would have "chimed" in earlier. I'm working on a 8 slow build up here in the Chandler area, be happy to help with any questions. Hopefully your kit has arrived by now or its going to feel like a long weekend! Enjoy the inventory- its time well spent....
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 05:27 AM.
|