VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-14
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-20-2016, 12:56 AM
salto salto is offline
 
Join Date: Apr 2015
Location: Wee Waa Australia
Posts: 279
Default Flaps leading edge.

I notice after initial fitting of leading edge of flap that there is a gap between the skin and leading edge ribs. If I set the rivets there I reckon it will pucker the skin.
I'm thinking if I put it on a flat surface and push down reducing the radius of the leading edge this may close the gap when refitted.
Anyone have same issue and was able to sort this?
Thanks
__________________
Kit 140241
Tail Feathers done
Fuselage kit completed.
wings almost complete.
Flaps and ailerons done.
Canopy next. Phew!
Reply With Quote
  #2  
Old 09-20-2016, 06:57 PM
salto salto is offline
 
Join Date: Apr 2015
Location: Wee Waa Australia
Posts: 279
Default

Bit embarrassing as the answer to my question was - don't be over zealous with the crimping pliers when removing the pucker in the top undrilled flange of the leading edge ribs.
They reckon when you start answering your own questions it's a sign of madness, they could be right!
__________________
Kit 140241
Tail Feathers done
Fuselage kit completed.
wings almost complete.
Flaps and ailerons done.
Canopy next. Phew!
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:48 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.