VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-14
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-27-2016, 03:18 PM
Av8rRob's Avatar
Av8rRob Av8rRob is offline
 
Join Date: May 2005
Location: Rescue, CA. KROB
Posts: 352
Default No prime trailing edge under wedge?

Just wondering what the logic is to scuffing the trailing edge under the wedge but then not to prime said area? My guess is the thickness of primer would skew results and the stuffing is for tape adhesion.... Thoughts?
__________________
Rob Lasater
Rv-14 flying baby, yeah.
Paid Dec 2019
Reply With Quote
  #2  
Old 08-27-2016, 03:29 PM
Mike S's Avatar
Mike S Mike S is offline
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,420
Default

You want the tape, pro seal or whatever to adhere to the metal, not a coat of paint.
__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
  #3  
Old 08-27-2016, 06:00 PM
rvbuilder2002's Avatar
rvbuilder2002 rvbuilder2002 is offline
 
Join Date: Jul 2005
Location: Hubbard Oregon
Posts: 9,035
Default

Quote:
Originally Posted by Mike S View Post
You want the tape, pro seal or whatever to adhere to the metal, not a coat of paint.
Mike is correct

If the adhesive is applied over primer, the bond will only be as good as the primer bond which could vary between very good or very poor depending on the primer used and the prep. application process used.
__________________
Opinions, information and comments are my own unless stated otherwise. They do not necessarily represent the direction/opinions of my employer.

Scott McDaniels
Van's Aircraft Engineering Prototype Shop Manager
Hubbard, Oregon
RV-6A (aka "Junkyard Special ")
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:48 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.