VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-14
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-19-2016, 05:11 PM
JDA_BTR JDA_BTR is offline
 
Join Date: Dec 2013
Location: Baton Rouge, LA
Posts: 1,055
Default Lower gear brace in way of riveting skin

Page 29-03 has us bolt in the lower gear braces and setup the fuselage to go on its side. Then we are to rivet per figure 3. But the gear braces cover a number of the holes making a shop head impossible.

Did you just unbolt and remove it after setting the rivets in the lower drag fitting?

Can the nylon lock nuts be removed and reinstalled here?

Any gotchas?
__________________
Ser 104142, RV-14A flying - N1463
Ser 83825, RV-8 building - N8638?
USN Ret, Urologist, AME, Repeat Offender
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:42 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.