VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #11  
Old 08-12-2016, 03:18 PM
TylerII TylerII is offline
 
Join Date: Jun 2010
Location: Easley, SC
Posts: 40
Default Stratus and HXr

The GRT instructions are at best vague and partially incorrect. Just hook up the output serial pin 3 to one of the open (unused) serial in ports on the Her and configure it for ADSB in on the HXR menu. There is no serial out to the Stratux. The HXr then will show the same data as the iPad shows. I have a 8.5 HX and the Stratux is working great. I am using a PI2 plus with the software off the GRT site. Make sure you have a good shield ground on the serial output connector to HXr case
Tyler N174MT
A&P EAA Tech Advisor
Reply With Quote
  #12  
Old 08-12-2016, 05:35 PM
mavmitchell mavmitchell is offline
 
Join Date: Jul 2013
Location: Perth
Posts: 27
Default

Hi Tyler, The GRT image wont boot on a pi3, not sure why..

This is the problem that Peter and I had, so I made a new image that works on the pi3.

Cheers.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:52 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.