VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 05-20-2016, 02:52 PM
pstraub's Avatar
pstraub pstraub is offline
 
Join Date: Nov 2015
Location: Hensley Airpark, TN
Posts: 143
Default Rear spar receptacle question

Hi all, I have tried a search but couldn't find the answer. I am building the fuselage without the wing kit, so I ordered the rear spar and stub spar pieces from the wing kit to properly fit the receptacles on the fuselage. Can somebody tell me from looking at my photo if I have the correct relationship between the W-1207B rear spare plate and F-1206C receptacle? Is my angle of mating the two pieces correct for the way the wing spar will actually slide into the slot in the fuselage? By the way, Van's sent me PN W-1207B-25, which I think is .025 oversized? I am assuming that is the right part, even though this is my initial attempt at shaping these pieces. Thanks for any info!

__________________
Paul Straub, First Flight May 5, 2017
N917PB, SN 120971
175 hours and counting.....
Reply With Quote
  #2  
Old 05-20-2016, 02:57 PM
AeroDog AeroDog is offline
 
Join Date: Aug 2011
Location: New London, NC (near Charlotte), Boulder, CO
Posts: 271
Unhappy

It fits better than mine.
__________________
Empennage, fuselage and wing kits complete
Finish kit nearly complete
RV-12 120593 N42KJ reserved
http://webpages.uncc.edu/~hill
http://jerre-hill.blogspot.com
=VAF= dues paid 2020

Last edited by AeroDog : 05-20-2016 at 02:58 PM. Reason: bad edit of HTML
Reply With Quote
  #3  
Old 05-20-2016, 03:13 PM
RVTrumpet's Avatar
RVTrumpet RVTrumpet is offline
 
Join Date: Jun 2012
Location: Hillsboro, OR
Posts: 63
Default

Looks great!
__________________
RV addict for life.

NOTE: The information, ideas, and opinions presented in this post are my own and not those of my employer. Build, test, and fly at your own risk.
Reply With Quote
  #4  
Old 05-23-2016, 12:39 AM
pstraub's Avatar
pstraub pstraub is offline
 
Join Date: Nov 2015
Location: Hensley Airpark, TN
Posts: 143
Default

OK, thanks very much for the replies.
__________________
Paul Straub, First Flight May 5, 2017
N917PB, SN 120971
175 hours and counting.....
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:33 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.