VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 12-13-2015, 10:28 AM
JDanno JDanno is offline
 
Join Date: Apr 2008
Location: Tennessee
Posts: 440
Default Garmin 750 configure

My GTN 750 has the serial 1 going to and returning from my EFIS (GRT HXr).
The wiring diagram has a box that says "configure ADS-B out".
I haven't been able to find anything in the Garmin literature that tells how to do that. HELP! Thanks!
Reply With Quote
  #2  
Old 12-13-2015, 01:06 PM
Taildrgr's Avatar
Taildrgr Taildrgr is offline
 
Join Date: Jun 2011
Location: DFW Area, TX
Posts: 229
Default

Hold down the Home button while turning on the GTN power to get into config mode.

Go to the serial section and select the in/out mode you need.
__________________
Bob B
RV-7A Sold
RV-4 Sold
DFW TX
Dues Paid
Reply With Quote
  #3  
Old 12-13-2015, 03:08 PM
BobTurner BobTurner is online now
 
Join Date: Dec 2011
Location: Livermore, CA
Posts: 6,797
Default

You may or might need multiple outputs from the 750.
1. You need a serial line out from the 750, in to the HXr, for gps data. Both ports should be configured for "Aviation" and set to 9600 baud.
2. You may have a line from the HXr, to the 750, to transfer data to the 750. Set the HXr to "fuel air data Z format". Set the 750 to "Shadin FADC". Both ports to 9600 baud.
3. If you have a 2020 approved ADSB-out device, the 750 can serve as an approved position source if your ADSB-out can accept Garmin "ADSB+" format.For example, the Garmin 330-ES, the Trig TT-22 and TT-31 mode S-ES transponders can all read this format. Run a wire directly from the 750 to the transponder, set the 750 output to "ADSB+". (Note: if you see "ADSB" but not "ADSB+" as an option, you need a software upgrade to the 750.)

Hope this helps.
Reply With Quote
  #4  
Old 12-13-2015, 05:12 PM
JDanno JDanno is offline
 
Join Date: Apr 2008
Location: Tennessee
Posts: 440
Default

Thanks all! That's exactly what I needed!
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:53 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.