|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

11-24-2015, 10:48 AM
|
|
|
|
Join Date: Jan 2014
Location: South Africa
Posts: 57
|
|
Rib mod on upper fuselage deck
Hi Guys
Anyone want to share pics of how they modified the 3 vertical ribs on upper fuse deck to accommodate 3 or 2 symmetrical 10" screens?
__________________
Regards
Henke  
RV 10 builder
|

11-24-2015, 11:28 AM
|
 |
|
|
Join Date: Feb 2011
Location: Hastings, MN
Posts: 582
|
|
Quote:
Originally Posted by henke@mweb.co.za
Hi Guys
Anyone want to share pics of how they modified the 3 vertical ribs on upper fuse deck to accommodate 3 or 2 symmetrical 10" screens?
|
No rib modification was needed for 3 10" Garmin G3X Touch displays with the Aerosport 310 symmetrical panel.
__________________
Ed Kranz
RV-10 N829EC - Flying
First Flight: 8/29/15
KSGS - Fleming Field, South Saint Paul, Minnesota
YouTube.com/GoodPlaneLiving -- Build Timelapse and Travel Videos . . GoodPlaneLiving.com -- Build and Travel Blog
|

11-24-2015, 11:29 AM
|
 |
|
|
Join Date: Dec 2007
Location: Dogwood Airpark (VA42)
Posts: 2,596
|
|
Henke,
No real need to do a mod for two 10" screens. You may need to do some modification if you want to keep the deep radios (like the GTN-650) in the center and high on the panel.
Send me your email and I'll provide a photo on what I did.
Carl
|

11-24-2015, 11:41 AM
|
|
|
|
Join Date: Jan 2014
Location: South Africa
Posts: 57
|
|
Thanks Carl. My username is my e-mail
__________________
Regards
Henke  
RV 10 builder
|

11-24-2015, 01:56 PM
|
|
|
|
Join Date: Jun 2010
Location: Sunman, IN
Posts: 2,189
|
|
Me too!
Carl, can you send me that picture too?
Rocketman at etczone.com
Thanx!
Bob
__________________
Bob
Aerospace Engineer '88
RV-10
Structure - 90% Done
Cabin Top - Aaarrghhh...
EFII System 32 - Done
297 HP Barrett Hung
ShowPlanes Cowl with Skybolts Fitted - Beautiful
Wiring...
Dues+ Paid 2019,...Thanks DR+
|

11-24-2015, 05:24 PM
|
 |
|
|
Join Date: Dec 2007
Location: Dogwood Airpark (VA42)
Posts: 2,596
|
|
Bob - sent.
Carl
|

11-24-2015, 07:24 PM
|
|
|
|
Join Date: Jun 2010
Location: Sunman, IN
Posts: 2,189
|
|
Sorry didn't come through
Carl, could you send it one more time, it didn't come through, thanx!
Rocketman@etczone.com
__________________
Bob
Aerospace Engineer '88
RV-10
Structure - 90% Done
Cabin Top - Aaarrghhh...
EFII System 32 - Done
297 HP Barrett Hung
ShowPlanes Cowl with Skybolts Fitted - Beautiful
Wiring...
Dues+ Paid 2019,...Thanks DR+
|

11-25-2015, 06:10 AM
|
 |
|
|
Join Date: Jun 2006
Location: Delaware, OH (KDLZ)
Posts: 4,196
|
|
Vic Syracuse's design is pretty well documented on Tim Olson's site, myrv10.com. Remember that this approach was created when most EFIS were still 4-6" deep, which is no longer the case.
|

11-28-2015, 10:07 AM
|
|
|
|
Join Date: Jan 2014
Location: South Africa
Posts: 57
|
|
Question for Ed
Hi Ed
Can you send me a couple of pics behind the instrument panel? Wanna see where you cut holes for the wires ect if you don't mind
__________________
Regards
Henke  
RV 10 builder
|

11-30-2015, 06:55 AM
|
|
|
|
Join Date: Aug 2005
Posts: 97
|
|
Quote:
Originally Posted by henke@mweb.co.za
Hi Guys
Anyone want to share pics of how they modified the 3 vertical ribs on upper fuse deck to accommodate 3 or 2 symmetrical 10" screens?
|
There is no need to modify the ribs. I mounted 2 Dynon Skyview 10" in the AeroSport symmetrical panel, with a center stack of PSEng audio panel,GTN650, SL30 mounted low in the cutout. Only had to make a cutout in the intermediate panel for rear of 650. Van's strongly advises against modifying the ribs, as they are structural.
__________________
Kelly McMullen
A&P/IA
EAA Tech Counselor
KCHD
RV-10 40866
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 05:47 AM.
|