Quote:
Originally Posted by Gizmos
I used the ra pos 12 on my rv6 with the 4 button switched. I was hoping that I could find a way to show the flap position on g3x while only having to push a button/ switch to change degrees. I would not mind having a switch I would have to click to change to a predetermined position. A simple up for up or down for down in 10 degrees steps
|
That you can do as you calibrate the G3X display to the position sensor so you can select the "stops". What I don't know is how easy it will be to stop at a given position by holding and releasing the switch when you reach a mark on the display--there could be some motor to display latency that would either have you going past the mark or stopping before it.
Although my G3X displays my flaps, I don't really use it as I have a Vertical Power VP-200 electrical system that both controls and displays my flaps.