|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

09-27-2015, 07:58 AM
|
|
|
|
Join Date: Dec 2006
Location: New Orleans, LA
Posts: 474
|
|
Firewall
While waiting for the finishing kit, I am trying to get some work done on the firewall without the benefit of the plans for the FWF. I know no one else has them either, but some repeat offenders might have an idea. For all of you smart people out there, can you tell me what is "probably" going on these nutplates? I am guessing the blue circle which is a AN4 is going to be a ground for the battery. All the other red spots are for a AN3. Does it matter how the starter and master are mounted, i.e. does mine look correct? I am going to order the protection diodes and add those. Any help and/or pictures would be greatly appreciated.

__________________
Stoney
First RV-14 Flight 04/17/2016
Serial #140087, N214SW - Sold
Last edited by jswareiv : 09-27-2015 at 08:42 AM.
|

09-27-2015, 03:15 PM
|
|
|
|
Join Date: Jan 2005
Location: Salem, OR
Posts: 296
|
|
I can shed a bit of light.
The rectangular box upper left side: Top hole will mount the MP sensor, if you use Garmin. I believe the second will be used in conjunction with the other for a Skyview or AFS sender. I may be wrong there.
The one in the blue circle is an AN 4. It will connect the negative terminal of the battery to the airframe with a ground strap in FWF kit.
The at the 11 o'clock position from the heater inlet will attach the bracket for the oil cooler. There is one in the same plane next to the sidewall also for the same purpose.
The one a couple inches to the right of the battery box will hold adel clamps to secure the battery cable to the master solenoid and the oil pressure line.
The other two, close to the master and starter solenoids I have no clue. They are both unfilled at this time and my engine install is complete save the exhaust system. Probably meant for items used by systems other than Garmin.
__________________
Mitchell Lock
President Van's Aircraft
|

09-27-2015, 05:51 PM
|
|
|
|
Join Date: Nov 2007
Location: Yarmouth, Nova Scotia
Posts: 2,408
|
|
Hello Mitchell
A few pictures of the FWF items installed would be great at this time please.
Thanks Ron
__________________
Thanks Ron
RV-10 SOLD
RV-14 Flying
AirCam flying
|

09-28-2015, 05:46 AM
|
|
|
|
Join Date: Jan 2005
Location: Salem, OR
Posts: 296
|
|
Figuring out how to upload pictures here. Never did that before. Will post them later today.
__________________
Mitchell Lock
President Van's Aircraft
|

09-28-2015, 09:16 AM
|
|
|
|
Join Date: Nov 2007
Location: Yarmouth, Nova Scotia
Posts: 2,408
|
|
Thanks you
__________________
Thanks Ron
RV-10 SOLD
RV-14 Flying
AirCam flying
|

09-28-2015, 11:49 AM
|
|
|
|
Join Date: Jan 2005
Location: Salem, OR
Posts: 296
|
|
__________________
Mitchell Lock
President Van's Aircraft
|

09-28-2015, 11:53 AM
|
|
|
|
Join Date: Jan 2005
Location: Salem, OR
Posts: 296
|
|
__________________
Mitchell Lock
President Van's Aircraft
|

09-28-2015, 11:55 AM
|
|
|
|
Join Date: Jan 2005
Location: Salem, OR
Posts: 296
|
|
__________________
Mitchell Lock
President Van's Aircraft
|

09-28-2015, 11:57 AM
|
|
|
|
Join Date: Jan 2005
Location: Salem, OR
Posts: 296
|
|
Now all I have to do is figure out how to get them all on one reply. If I can build an airplane, I suppose I can.
__________________
Mitchell Lock
President Van's Aircraft
|

09-28-2015, 12:40 PM
|
|
|
|
Join Date: Dec 2006
Location: New Orleans, LA
Posts: 474
|
|
Pictures
Quote:
Originally Posted by MLock
Now all I have to do is figure out how to get them all on one reply. If I can build an airplane, I suppose I can.
|
Make the size "message board".
__________________
Stoney
First RV-14 Flight 04/17/2016
Serial #140087, N214SW - Sold
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 01:31 AM.
|